Specification :

Mixing Granulator, the process of Mixing, Wetting and granulating can be completed in single working period. It is suitable in the line of pharmaceutical, food, chemicals industry. It is one of the advanced facilities which meets the GMP requirement and has the characteristics of high efficiency, best quality, low consumer, none pollution as well as safety, etc.
Characteris:
1.Mixation and granulation in a stainless steel construction.
2.The journal is sealed by clear air.
3.Three-dinensional stirring and mixing that ensure high Degree of consistency.The Process of mixing.
Granulating can be Completed in single. working period which meets the GMP requirement.
Compare with other normal equipment. The efficiency is 4-5 times higher than that of others. but the consumption for adhesive is 15-20% less than the traditional technology.
4.Having protective divce that en-sure produce saftly.
5.Among the above machines, the speed of the stirring of the paddles of Model HLSY100S and HLSG100 HLSG200 the speed of the granulating knife shall be set up and controlled by a frequency transformer. It can be widely used for granulation in various industries.
Operating Principle:
The granulating process is divided into two procedures of mixing and grain forming, which are finished in the same vessel. Powder materials in the fixed tapered vessel are hit and dispersed into semi fluid rolling state and given a complete mixture under the stirring action of mixed stock. With the infusion of bond, the powder is gradually moistened and the shape of materials is changed, which has strengthened the extrusion, attrition and kneading functions of the mixing paddle and vessel wall on the materials and thus formed evenly wet soft materials. These soft materials gradually turn into fine and homogeneous wet grains under the high -speed cutting and grain forming of the granulating paddle and eventually discharged through the outlet. The grain size is dependable on the material characteristics, rate of material preparing tool and time of grain forming.
* Main Uses:
It is suitable for producing tablets and capsules in pharmaceutical industry and may provide ideal granular raw materials for the operation process of tablet or capsule forming.
* Main Characteristics:
1) Grains produced by this machine enjoy true-ball sense, good fluidity and homogeneous material, which may effectively boost tablet pressing, improve tablet quality and enhance the capsule filling and thus make the tablets enjoy better brightness, hardness, disintegration and discharge. The production cost is also saved.
2) The part in contact with materials is made of stainless steel 316 L while the appearance part is made of stainless steel 304.
3) It is an ideal wet-process granulating equipment of fine fabrication provided with considerate safety chain and auto water cleaning system which is convenient for cleaning and free of metal stains at dead angle and material deposit.
4) Based on the different features of Chinese and western medicines, wet process mixer granulators are divided into Chinese medicine type and western medicine type.
5) Human-computer interface/PLC control may be configured or exclusion of explosion may be adopted according to the demand of users.
Main Technical:

ITEM
TYPE

HLSG10
HLSG50
HLSG100
HLSG150
HLSG200
HLSG300
Bowl Volume Litre
10
50
100
150
200
300
Max Material Charge Amount kg
3
15
40
50
80
100-130
Mixing Power kw
0.8
5.5
7.5
6.5
13
22
Mixing Speed r/min
430-600
25-500
25-500
220-330
25-500
10-150
Chopper Power kw
0.55
1.5
3
4.5/5.5
4
7.5
Chopper Speed r/min
1500-3000
300-3000
0-3000
1500-3000
0-3000
300-3000
Dimension mm
930*320*1250
1900*700*1400
2400*880*1560
1700*680*1720
2055*830*1340
2500 *1400*2000
1100*3100*2420
2400*1000*1685
Net weight kg
180
500
850
1000
1100
1800