Specification :

Product Description
The Outer Tape T-200 series is cold applied Protection Tape coating systems for Protection of the pipe and its T-100 Series surface from damages. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:
Conformable to irregular shapes.
No release liner.
Established in ground history.
Complies with AWWA ( American Water Works Association) C-214 standard.
Compatible with general coating systems
T-200 Tape series Coating Systems with AWWA C-214 Standard
Type of the tape: T-240 T-250 T-265 T-280 T-2100 T-2130
Thickness: ( ASTM D 1000) Total mm mil mm mil mm mil mm mil mm mil mm mil
0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50
Film 0.28 11 0.38 15 0.51 20 0.63 25 0.64 25 0.76 30
Adh esive 0.10 4 0.13 5 0.13 5 0.13 5 0.38 15 0.51 20
Tensile: 29 lbs/ in 39 lbs/ in 39 lbs/ in 53 lbs/ in 66 lbs/ in 78 lbs/ in
Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter
Width: 2� , 3� , 4� , 6� , 9� , 12�
Colour: Black, White, Red, Blue, Purple, etc.
Composition: Backing: low and high polyethylene & Adhesive: Butyl Rubber
Elongation: 300%
Adhesion to Inner Layer T-100 ( ASTM D 1000) 46 oz/ in, 5N/ 10mm
Cathodic Disbandment: ( ASTM G8) 0.25 in radius 6.4 mm
Water Vapor Transmission Rate: ( ASTM F1249) 0.2g/ 100in 2 / 24h, 0.3mg/ cm 2 / 24h
Water Absorption: ( ASTM D570) d 0.1
Volume Resistively: ( ASTM E257) 2.5 X 10 12 ohm • m
Dielectric Strength: ( ASTM D 149) 40 KV
Temperature Range : ( Normal in Ground Service) -30 to 160 o F, -34 to 71 o C