Specification :

Newly developed " Liquid Super Separator" is a new concept of a pneumatic mist remover without filter element. The " Element Free Pneumatic Water Separator" uses a special centrifugal technique with " radial multi-nozzles" that is world patent pending and makes it possible to reject liquid mist ( water and oil) to 99.9% ! This pneumatic mist separator is virtually maintenance free, as there is no need to replace any filter element. A standard traditional filter with an element and automatic drain may be placed downstream to control micron size but the high liquid and mist removal of the separator will keep it clean and it may not require element replacement for an extended period of time. Maintains extremely low pressure drop.

Special features and advantages of Pneumatic Water and Oil Separator

No filter element
Minimal pressure drop
Maintenance free
Complete mist rejection
Mist rejection rate : 99.99%
Oil mist rejection rate : 99.99%
Semi-permanent durability
Power free
Complete with Auto-drain
No performance change over time
Trouble free with simple construction
Large capacity but compact
Low cost
5 year warranty ( except for auto drain)
Using the Super Separator
Very large water separators sometimes used upstream to remove liquid but it does not prevent downstream condensation due to the temperature difference between the inside and outside of the compressed air line.

The X-Streamâ„¢ Super Liquid Separator is installed at the end of a compressed air main line before a branch line, or just before the outlet of air use for the complete rejection of the mist due to the condensation inside the pipe and also remove any oil mist to 99.9% . This makes it possible to get an essentially maintenance free operation in the control of water and moisture in air line. The only possible part change would be the replacement of the auto drain valve giving the unit a semi permanent life time.