Specification :

Materials: HDPE, Nylon
Production Method: injection molding
Use: Grain Processing

Type:
1.Deep Bottom Bucket
2.Low Profile Bucket
3.No Bottom Bucket
4.Split Bucket
5.Rice Milling Bucket
6.Inductive Bucket
7.Drying Bucket
8.D Series Bucket

Features:
1High intensity, wear-resistance, corrosion-proof, with longer life span than steel buckets.
2Light weight, extend the life span of the bucket, reduce the energy consuming of the elevators.
3Good pliability , low product damage percent of only 1.
4No spark caused in operation, avoid the possibility of dust exploration.
5Clean discharge, wide temperature applications.
Technical Index:
1Method of Manufacture : Injection molded.
2Drilling: Free of charge. Special drilling is offered according to customers demand. ( For detailed drilling specifications, pls refer to the related specification chart)
3Bucket Spacing : Minimum bucket spacing has historically been nominal projection plus+ 50mm
4Installation: Norway flat head elevator bolts, flanged bolt, sabre-tooth bolt, and belt bolt.
5.Sanitary Standard: FDAapprovalnon toxic and no causticity itselt, suitable for food industry.

Physical and Chemical Properties of HDPE
ADensity: 0.9350.960 g/ cm2
BMechanical properties: Rupture strength: 900 N/ cm2 Extensibility at break: 300%
CCircumstance Temperature Range: -50+ 80 Heat-resisting Properties : Melting Point: 136
Vicat Softening Point: 134 Brittle Temperature : d-70 Coefficient of Heat Expansion : 1.5× 10-14m/ Thermal Deformation Temperature : 85
DFriction Properties : Average rate of Friction : d1.32 Coefficient of Friction : 0.080.12
ESparks resulted form abnormal collision will not occur, nor does the electric discharge because of strong static electricity electrostatic charge caused by friction in the operation.
Volume Resistivity : d7× 1015© · cm
Physical and Chemical Properties of Nylon:
ADensity : 1.14g/ cm2
BMechanical Properties : Tensile Strength: 82.7Mpa
xtensibility at break : e300%
CCircumstance Temperature Range : -40+ 105 Heat-resistance Properties : Melting Point: 255 Brittle Temperature : -80 Coefficient of Heat Expansion : 7× 10-5m/ Thermal Deformation Temperature : 255 ( 0.5× 106Pa)
DVolume Resistivity : 1× 1015g/ cm2

PU buckets should not be used on the following:
1.Materials over 100
2.Large dense material such as gravel and ore over 3/ 8" diameter.

If you need specific product standard, please contact us at any time.