E1-RJ45 protocol converter

Quantity Order:

E1-RJ45 protocol converter

GE-01 E1-RJ45 protocol converter uses reverse multiplexing technology to transmit 10/ 100BaseT data to Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. This equipment is a high-performance, self-teaching long range, compeletly Transparent for last protocol.Customers can according yourselves set up transmission bandwidth( N* 64k , the max rate can reach 2.048Mbps.Ethernet can accept 10/ 100M and AUTO MDI/ MDIX.

GE-01 E1-RJ45 protocol converter can self-study and Updated the MAC address with the Local Area Network, and just need frame to transmit.The inner structure used High Performance 64M Cache memory, volumn from 32 frame to 512 availabel.It has the special rights to prevent Ethernet loopback, avoiding E1 loop cause Ethernet breakdown

Specifications

E1 interface:

Connector type: unbalance 75© / BNC Q9  balance 120© / RJ45

code type: HDB3

code rate: 2.048Mbit/ s± 50ppm

Jitter: ITU-T G.823

Frame construction: G.704

Ethernet Data:

Connctor type: RJ45

Interface rate: 10/ 100M adjust automatic

Iterface mode: Full/ Half Duplex

Accept max frame length: 1552 Byte

Power:

Power supply: AC176V~ 264V / 50Hz DC-36~ 72V

working temperature: 0-60º C

Relative humidity: < 95%

Power Consumption:

Recommend to your friends