Specification :

Digitalphotometer NANOCOLOR® 500 D
Mircoprocessor controled filter photometer

The digital photometer NANOCOLOR® 500 D is the consequent development of our very successful photometer NANOCOLOR® 400 D. Adapted to our customers’ requirements, today and tomorrow, it is suitable for universal use in water and wastewater analysis. This includes municipal and industrial wastewater, drinking water, surface water, ground water as well as cooling and boiler water.

Technical data
Type: Filter photometer with microprocessor control, self-test and auto-calibration
Light sources: Tungsten lamp
Optical system: Automatic filter wheel with 10 interference filters
Wavelength: 345 / 365 / 436 / 470 / 520 / 540 / 585 / 620 / 690 / 800 nm
plus 2 compartments for additional filters
Wavelength accuracy: ± 2 nm
Wavelength calibration: Automatic
Wavelength selection: Automatic, barcode
Spectral bandwidth: 10 – 12 nm
Photometric range: ± 3.0 E
Measuring modes: More than 100 pre-programmed tests, 100 optionally programmable methods, absorbance, transmission, factor, kinetics
Cuvette holder: round tubes 14 mm ID, rectangular cuvettes 10, 20, 50 mm
Data memory: 500 measured data sets, GLP conform
Display: graphic display, backlight, 64 x 128 pixels
Operation: bar code technology, display user guidance, foil-covered push-buttons
External light: Insensitive, open cuvette slot
Interfaces: USB 1.1 and bidirectional serial RS 232
Update: Via Internet / PC
Operating range: 10-50 ° C , max. 90% relative humidity ( without condensation)
Power supply: 100 – 240V~ , 50/ 60 Hz / 6V, 3.2 Ah via built-in battery with charge regulator and mains power supply
DimensionsL / B / H: 227 x 282 x 105 mm
Weight: 2, 4 kg
Warranty: 2 years
This appliance comply with the following EC directives:
– 73/ 23/ EEC of 19.02.1973 – Low-Voltage Directive
– 89/ 336/ EEC of 03.05.89 ( including amendment directive 92/ 31/ EEC) – EMC Directive

Ordering information
Universal photometer NANOCOLOR® 500 D incl. software CD, manual, dust cover, mains power supply, USB cable, data cable and calibration cuvette in stable transport bag Cat.No. 919 500