Products Catalog

Specification

Axon HEARING TOOL MODEL K-86 IN THE EAR ( ITE) Hearing Aids Hearing impairment is not just a problem for elderly people only, but also has been felt from infancy, childhood to adolescence. In order for this auditory dysfunction does not disturb the activity, we currently provide hearing aids. we offer a price of 300, 000 / pcs .* Specification: Max Out 110 + 5dB, 30dB Total Harmonic Max Gaim Distortio 10% ( AT 100 Hz) , equiv d40dB Input Noise, Frequency Range 300Hz-4000Hz, Voltage 1.5v / 1.3v , Current d4mA, Zinc Battery * Prices above are priced starting in July 2009 and may change at any time. * Prices above do not include postage. * To purchase please confirm first on price and postage Care Hearing Aid Care and Maintenance of good care is fundamental to the survival and function of your hearing aids. A hearing aid is a great investment. It is important for you to take steps to maintain its function as it should. Clean your hearing aids on a regular basis to keep your hearing aids in order to work well every time. Batteries It is important to use a new battery in your hearing aids. If your battery runs out of stock, you can buy at a store that sells batteries hour. Batteries should be stored in a place that is not damp and keep out of reach of children and pets, do not store them with drugs. At night place a battery in a hearing aid should be in an open state. This is to ensure that hearing aids really are turned off and not make the battery run out or dry out. If you use a hearing aid dryer box, take the battery from the tool box for the dryer will make the battery dry. Hearing Aid Cleaning the microphone and receiver on your hearing aids easily once exposed to dust and should be checked regularly. The tools to clean the hearing aids at home can very easily at a price that is not expensive. The tools are a small brush and a cleaning earwax. To clean, you can also use a dry soft toothbrush to clean everyday. Soft brush to clean the microphone and receiver from dirt and dust ear. If it appears there was dust in the hose receiver, earwax cleaning tool ( wax loop) can be used with extreme caution to clean it. Because the receiver position next to the hose is then you should be very careful, do not include wax loop too deep will cause the receiver is broken. Keep your hearing aids do not get into or exposed to water. You can clean the tool with a soft, dry cloth to clean the dust. Earmold / earmold ear mold / mold can be separated from the ear hearing aid ( AID model) and can be cleaned with mild soap. Wax loop can be used to remove ear wax that may get into the hose from the ear canal. Earmold and hose must be completely dry before you install back on hearing aids, because the remaining water can cause your hearing aids were damaged. If there is ear wax in earmold tube that can not be removed with a wax loop or washed, it means that the hose had to be replaced with new ones. Earmold hose basically have to be replaced periodically, if the hose has become brittle, hard, began to change color. Humidity Humidity will be harmful to hearing aids, hearing aids should be located in the dryer every night. Perform cleaning of hearing aids before storing in the dryer. Battery can be removed before you put it in the dryer ( dry aid kit) . Do not store batteries in dry aid kit because it will make the battery dry and reduced strength. Troubleshooting Problems When your hearing aids do not amplify sound, try to check: * Is there dirt in the ear hearing aid receivers that make noise to get to the blocked ear? * Is the battery exhausted? * Does the tool have you turn it on? For information and reservations TOOL HEARING