Specification :

Beam Splitter:

The common Beam splitters are used to split or combine laser beam. We could make them as plate or cube, following is some information about our standard specs:

T/ R: -------------50/ 50+ / -5% , for random polarization
-------------T= ( Ts+ Tp) / 2, R= ( Rs+ Rp) / 2
Coatings: ( Incidence angle: 45 degree)
Surface1: ----------Single wavelength partial reflectance
Surface2: ----------------------AR-coating
Standard Coating wavelength:
Narrow Band: ---------488, 532, 632.8, 650, 808, 850, 980, 1064, 1310, 1550 nm
Broadband: -------------450-650, 650-900, 900-1200, 1200-1550, 1500-1610

Standard plate size:
Size( mm) Narrow Band Broadband
Part No. Part No.
10x10x2 BSP1103 BSP1203
12.7x12.7x2 BSP1104 BSP1204
25.4x25.4x2 BSP1105 BSP1205
F25.4x2 BSP1106 BSP1206

Stand cube size:
Size( mm) Narrow Band Broadband
Part No. Part No.
3.2x3.2x3.2 BSC1101 BSC1201
5x5x5 BSC1102 BSC1202
10x10x10 BSC1103 BSC1203
12.7x12.7x12.7 BSC1104 BSC1204
15x15x15 BSC1105 BSC1205
20x20x20 BSC1106 BSC1206
25.4x25.4x25.4 BSC1107 BSC1207
Note: Different size are available upon request.