Specification :

Advantages
l Large screen(128×64 dot matrix LCD), showing all functions and parameters.
l Test at any angle, even upside down.
l Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
l Seven impact devices are available for special application. Automatically identify the type of impact devices.
l Large capacity memory could store 500 groups (Relative to average times32^1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
l Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
l Battery information indicates the rest capacity of the battery and the charge status.
l User calibration function.
l USB port with the PC humanity multi-functions data proceeding software.
l Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
l NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
l Auto power off to save energy.
l Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.

Main Application
l Die cavity of molds
l Bearings and other parts
l Failure analysis of pressure vessel, steam generator and other equipment
l Heavy work piece
l The installed machinery and permanently assembled parts
l Testing surface of a small hollow space
l Material identification in the warehouse of metallic materials
l Rapid testing in large range and multi-measuring areas for large-scale work piece

Technical Specifications
l Measuring rangeHLD170^960 HLD
l Measuring direction360°
l Hardness ScaleHL
HB
HRB
HRC
HRA
HV
HS
l Displaydot matrix LCD128×64 dots
l Data memory 500 groups max.relative to impact times 32^1
l Printing paper: width is 57.5±0.5 mm, diameter is 30mm
l Battery pack: 6V NI-MH
l Battery charger: 9V/500mA
l Continuous working periodabout 150 hoursWith backlight off, no printing
l Communication interfaceUSB1.1
l Outline dimensions212mm×80mm×32mm

Configuration

No. Item Quantity Remarks
Standar d Configuration 1 Main Unit 1
2 D type impact device 1 With cable
3 Standard test block 1
4 Cleaning brush (I) 1
5 Small support ring 1
6 Battery Charger 1 9V 500mA
7 Paper for printing 1
8 Manual 1
9 Instrument case 1
Optional Configuration 11 Cleaning brush (II) 1 For use with G type impact device
12 Other type of impact devices and support rings Refer to Table 3 and Table 4 in the appendix.
13 DataPro software 1
14 Communication cable 1