Specification :

Features
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 130 Powerful Instructions – Most Single-clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
• Nonvolatile Program and Data Memories
– 8K Bytes of In-System Self-Programmable Flash
Endurance: 10, 000 Write/ Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– 512 Bytes EEPROM
Endurance: 100, 000 Write/ Erase Cycles
– 1K Byte Internal SRAM
– Programming Lock for Software Security
• Peripheral Features
– Two 8-bit Timer/ Counters with Separate Prescaler, one Compare Mode
– One 16-bit Timer/ Counter with Separate Prescaler, Compare Mode, and Capture
Mode
– Real Time Counter with Separate Oscillator
– Three PWM Channels
– 8-channel ADC in TQFP and QFN/ MLF package
Eight Channels 10-bit Accuracy
– 6-channel ADC in PDIP package
Eight Channels 10-bit Accuracy
– Byte-oriented Two-wire Serial Interface
– Programmable Serial USART
– Master/ Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and
Standby
• I/ O and Packages
– 23 Programmable I/ O Lines
– 28-lead PDIP, 32-lead TQFP, and 32-pad QFN/ MLF
• Operating Voltages
– 2.7 - 5.5V ( ATmega8L)
– 4.5 - 5.5V ( ATmega8)
• Speed Grades
– 0 - 8 MHz ( ATmega8L)
– 0 - 16 MHz ( ATmega8)
• Power Consumption at 4 Mhz, 3V, 25° C
– Active: 3.6 mA
– Idle Mode: 1.0 mA
– Power-down Mode: 0.5 ¼ A