Parting Locks

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Special Features:
Material High grade Nylon+ SCM435

Parting Lock is used in moulds for pulling the...

Description:

Install min. 4 nos. On one mold. 2 nos. Each on both sides of the plate.
After placement of the Parting locks on the plate, turn the bolt to 90 degree and plastic lock will expand.
Use H 7 reamer in hole of the mold plate with + 0.1 mm range.
Mould weight < 100 kgs, using 4 nos. Of 13 E parting lock.
Mould weight < 500 kgs, using 4 nos. Of 16 E parting lock.
Mould weight < 1000 kegs , using 4 nos. Of 20 E Parting lock.
If more load to be pulled then above limit then use more nos. Of Parting locks to be used. I.E. 6 or 8 nos.
Very easy to assemble and disassemble without dismounting the mold from the machine.

Recommend to your friends