MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Specification

Dual Beam Technology and Interference Filters for highest accuracy

The AL450 is a contemporary, microprocessor-controlled photometer with ergonomically designed keypad and large format graphic display. It is equipped with a wide range of pre-programmed methods based on the proven range of AQUALYTIC® tablet reagents, liquid reagents, tube tests and
powder reagents ( VARIO Powder Packs) . Users can also store their own methods.

The AL450 is a filter photometer using interference filters at 6 different wavelengths. The unique design of the optics allows the automatic selection of the required wavelength without any moving parts. This and the dual beam technology utilizing an internal reference channel, guarantees the highest accuracy.

Technical Data
- Display Graphic-display
- Optics 6 temperature compensating LED, internal reference channel, photodiode in protected sample chamber
- Wavelengths 6 interference filters in one unit,
» 1 = 430 nm IF ” » ( nm) = 5,
» 2 = 530 nm IF ” » ( nm) = 5,
» 3 = 560 nm IF ” » ( nm) = 5,
» 4 = 580 nm IF ” » ( nm) = 5,
» 5 = 610 nm IF ” » ( nm) = 6,
» 6 = 660 nm IF ” » ( nm) = 5
IF = interference filter
- Interface RS232 for printer and PC-connection
- Download Software and methods update by means of the internet
- Operation Acid and solvent resistant, touch-sensitive keypad with audible feedback
- Power Supply 7 Ni-MH-battery pack
( AA/ Mignon) , charged whilst in the unit with external mains charger,
integrated overload cut-out
- Dimensions 265 x 195 x 70 mm
( L x W x H)
- Weight approx. 1000 g
( unit) with rechargeable batteries
- Ambient Conditions up to max. 90 % humidity ( non condensing) approx. 5– 40 ° C
- Auto-Off approx. 20 minutes after last
keypress with no loss of data
- Auto-Check By pressing ON/ OFF-key
- Memory Capacity approx. 1000 data sets with date, time and registration number
Approval CE

Accessories
Set of 12 round vials with cap
Height 48 mm, Ø 24 mm
Set of 10 round vials with cap
Height 90 mm, Ø 16 mm
for calcium hardness
Adapter for round vials Ø 16 mm
Lid for adapter
Sealing ring for vial ø 24 mm ( 12 pc.)
Cleaning cloth for vials
Adapter for Vacu-vial®
Plastic beaker, 100 ml
Plastic funnel with handle
Plastic stirring rod, 13 cm length
Cleaning brush, 10 cm
Syringe, plastic, 2 ml
Syringe, plastic, 5 ml
Syringe, plastic, 10 ml
Rubber seal cap
Mains charger, 100 - 240 V,
50 - 60 Hz, TI-instrument connector
Mains charger, as 192055,
with UK connector
Mains charger, as 192055,
with USA/ Japan connector
Mains charger, as 192055,
with Australian connector
Cable for connection to PC,
serial 9-pins
AA Ni-MH, 1000 mAh ( 7 pc.)
Lithium battery
Paper printer DPN 2335
Verification Standard Kit