OPSS-1 porosity vision scanner control at moving web material

Quantity Order:

IPM has developed a large number of sophisticated, multi functional, optical online sensor systems, patent pending DE10251610, patent grand in China 200310104764, stationary, scanning control processes, devices and systems for fast moving webs, fabrics or other material sheets to detect very precise and reproduce their specified product properties during production. Here there introduction. OPSS-1 OPRL-1 vision control systems are equipped with multiple IR, NIR, VIS monolithic spectral colour sensors, precision line lasers, CCD imagine devices, DSP, ATMEL, INFINEON sensor internal controllers, own firmware, high speed data link, at scanning speeds from 20–500 mm per second, at web widths up to 5000 mm, measuring gaps from 2.0-5.0 mm, optical inline detection of permeability, porosity, spectral transmission, opacity, extinction, particle absorption, porosities ranges from 80 up to 5000 C.U. (Coresta ml/min/2cm2), respective from 50 down to 3 Gurley, position control of micro perforation lines with 0.1 mm accuracy, nano micro pores from 50 nm up to 200 micron diameter by up to 300 pores per cm2. With real time data determining of certain parameters, optical transmission, spectral grades, porosity integrals, envelope curves, internal calculated measuring values.

Thus direct with close loops and feedbacks to the power electronics of fabrics treatment units. Micro perforation or other treatment system makes it possible to compensate any changes in web treatment parameters and their partial locations so that each jumbo roll as well single, quad bobbin sets can be produced quantity and quality controlled without intermediate stops in order of ISO 9001 or 9002 certifications. Thus sophisticate, precise, liable, repeat accuracy, easy visualized, optical online measurement techniques archives perfect ways to control and convert pneumatic, fluid, gas, jet streams, static permeability, naturally porous grades, filtration levels, breathable or ventilation effects, etc. at fast moving webs. Their conditions can be easily met by using optical transmission technology thanks to described processing in fully online stationary or scanning control units, extremely small pore dimensions, high fabric speeds up to 1000 m/min by high repetition rates. That completely independent from base material properties as consistency, colouring, density, formation, pin holes, smoothness, stretching, shrinking, brightness, opacity, optical spectral, Raman, property, gauging thickness weight, moisture content and other known influences.

Applications ranges. The electrostatic nano or micro perforation patent grad with DE10328937 including Co2 slab fiber yag excimer diode laser, other material going trough or surface treatment, as well for micromachining and nanotechnology, is usually used depending on quality at fine, rotogravure or offset printing, holographic or publishing paper, writing, magazine, newspaper, flexo, packaging, bonded fabrics, non-woven, filter, coffee, tea, bag, sack, craft, food, fresh fruit, force, reinforce, tipping, cigarette, plug wrap, fibre, facial tissues, toilet, decoration, wallpaper, gift, watermark, towels, bleached dyes shiny or clay, recycling, booklet, bible or other special paper, certain plastic films, foils, coating, laminating, converting, extruding, Polyofine, Polysulfone, Elastomer, textile, Polymer or most of that varied types. As well aluminium, gold, steel, stainless, brass, cupper, ceramic, solar, panel, titanium, silicon, diamond.

It is also used especially for additionally treating materials when aiming special characteristics by physical or regular process reasons what cannot be achieved by other process technologies. Material base weights from 10 up 150 grams per m2 by thicknesses from 5 up to 100 micron are possible to use. Including defect inspection, process automation, moisture vapour transmission rate, abrasion resistance of lamination, waterproof or breathable fabrics. Our state-of-the-art, industrially approved, sophisticated, compact, multi functional, optical online sensor scanning systems together or without electrostatic, laser perforation technology operates precise and reliable 24/7, are integrate able into existing rewinding, slitting, spooling, spreading, printing, labelling, complex production lines or other machines and other production processes as well. Also, they can be used as completely independent micro surface-all-over or zone perforation units. Fully new ranges of applications will be made available total new products with special features.

Recommend to your friends