Specification :

More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency (Please start the operation with the instructions of the technical staff from the factory or agent)
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP)
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc
Excellent two-bolt pole made in Germany and slide ways made in Japan or Korea
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut and process and manufacture advertising mode plates, presents and architectural wood models
It is able to go on engraving when the electricity is cut or the tool is broken.

Technical Specifications
Type: JD-1216DS
Working Area: 2000*1320mm
Travel of Engraving: 1600*1200*90mm
Maximum Speed: 12000mm/min
Engraving Spindle Inverter 1500W
Rotational Speed of Spindle 6000-26000rpm
Manner of Receiving Data USB
Capacity of Floppy Disk NO
Memory 32M
Format of Instructions G code or HPGL
Cutter Ø3.175orØ6.00
Power Supply AC220/50HZ
Electric Power 600W
Weight 500Kg http://www.signmaker.cn
http://www.allsign.com.cn
sales@signmaker.cn
sales@n bmec.com