Specification :
MCW-UEC220DS is a USB2.0 TO E-sata array hard disk enclosure, supports RAID 1. RAID 1is also called Mirror or Mirroringwhich ensures user of reliability and restore of data to maximum extent. every writing to disk will automatically backed up 100% to separate disk in RAID 1 .
As Figure abovesystem will read data in original source disk in RAID 0and will not read data in back up disk, if fails to read data in original disksystem will automatically change and read data in back up diskthis will not interrupt operation / task for user. Of coursewe must replace the failed disk immediately and creat Mirror with back up datato avoid data loss you can’t afford if a back disk fails.
As storage data is backed up 100% in RAID 1, so RAID 1 provide the highest level protection for the data among all the RAID modes, mirror can’t increase storage performancebut as it provides high level of protection for datait is specially used for storing critical data
Features
· USB2.0 TO 2 E-SATA harddisk
· USB2.0 compliant,backwards compatible with USB1.1
· Supports mass storage
· Plug and playno driver required.
· Support simple, reliable,high performance RAID 1 mode
· Restores automatically data in RAID 1 mode
· Being common adaptor in non-RAID 1.
· Through SteelVine manager, you could view operation status of device.
· Compatible with Windows 2000,XP,2003 Server,Windows Vista,MacOS X,Linux
Specifications
Requirements
1. Intel Pentium-III 500MHz equivalent or faster
2. Windows 2000,XP,2003 Server or Windows Vista with the latest Service packs, MacOS X, Linux.
3. CD-ROM drive
4. 64 MB of RAM (minimum)
5. 250 MB of free disk space
6. Super VGA (800×600) or higher resolution display with at least 256 colors
7. Mouse or compatible pointing device
8. USB connection:USB 1.0 or 2.0 direct host connection or USB hub