Specification :
The XCMG GR Series Motor Graders are mainly used in ground leveling , canalling , slope scraping , earthmoving , scarification or snow removal work on road, airfield , farmland , and so on .They are necessary construction machines for national defense engineering , mine construction, town and country roads building , and farmland improvement..
Performance and characteristic
1. New appearance design.
2. The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius, maneuvering and flexible.
3. The electro
hydraulic controls the power shift gearbox, with 6ahead gears and 3 back gears.
4.The international matching hydraulic parts are adopted, with reliable operation.
5.The motions of the blade are fully hydraulically controlled.
6.The rear axle is the three-section driving axle which is provided with the NO
SPIN self-locking differential mechanism.
7.The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved.
8.The cab is grand and nice, with wide eyeshot and good sealing .
9. The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added .
Main Technical Specification
GR135
Basic specification
Engine model 6BT5.9
Rated power/ speed 100/ 2200kw/ rpm
Dimension( L* W* H) 8015* 2380* 3050mm
Operating weight( Standard) 11000kg
Performance specification
Travelling speed , forward 5, 8, 13, 20, 30, 42km/ h
Travelling speed , reverse 5, 13, 30km/ h
Tractive force( f= 0.75) 61.3KN
Max. gradeability 20%
Tire inflation pressure 300kPa
Working hydraulic pressure 16MPa
Transmission pressure 1.3~ 1.8MPa
Operating specification
Max. steering angle of front wheels 49
Max. lean angle of front wheels 17
Max. oscillation angle of front axle 15
Max. oscillation angle of balance box Front and end 16
Frame articulation angle 27
Min. turning radius using articulation 6.6m
Biade
Maximum lift above ground 410mm
Maximum depth of cutting 535mm
Maximum blade position angle 90
Blade cutting angle 28-70
Circle reversing rotation 360
Moldboard width X height 3710× 610mm
Under our policy of continuous product development and improvement , we reserve the right to change specifications and design without prior notice.