Specification :

MAG-121N( 120 angle type) For precision griding and polishing
MAG-122N( 120 angle type) For surface griding and polishing
MAG-093N( 90 angle type) For surface griding and polishing
MAG-123N( 120 angle type) For surface griding and polishing

Micro angle grinder

120 and 90 degrees angles are prepared based on the human engineering.
The unpleasant noise is reduced, which tends to come out by the angle type.
Abundant tip tools correspond to various uses.

MAG-121N Set
MAG-121N• Air hose1.5m• Hose band 2 pcs• Quick joint• Over hose• Set pin• Wrench• 13 Mounted point NSL 2pcs.• Lap shaft• 25 disk type NSL7pcs.• Mounted point10 Rubber disc holder• 10Pol-Per system9pcs.

MAG-122N Set
MAG-122N• Air hose1.5m• Hose band 2 pcs• Quick joint• Over hose• Set pin• 20 cups grinding wheel 1 pcs.• 20Rubber disc holder• 20NSL7pcs.• 20Pol-Per system9pcs.

MAG-123N Set
MAG-123N• Air hose1.5m• Hose band 2 pcs• Quick joint• Over hose• Set pin• 30 cups grinding wheel 1 pcs.• 30Rubber disc holder• 30NSL7pcs.• 30Pol-Per system18pcs.

MAG-093N Set
MAG-093N• Air hose1.5m• Hose band 2 pcs• Quick joint• Over hose• Set pin• 30 cups grinding wheel 1 pcs.• 30Rubber disc holder• 30NSL7pcs.• 30Pol-Per system18pcs.

Model Code No. Max.number of
revolutions without
loading
Max.size
( Not including tip tools) Air pressure
supply The amount of
air consumption
( per min.) Weight Price
MAG-121N 108 52, 500rpm 148 × 55 × 17 0.6MP 120NL 140g 36, 000yen
MAG-122N 107 35, 000rpm 141 × 45 × 17 0.6MP 120NL 140g 36, 000yen
MAG-123N 106 23, 500rpm 142 × 48 × 32 0.6MP 120NL 175g 36, 000yen
MAG-093N 105 23, 500rpm 138 × 41 × 33 0.6MP 120NL 160g 36, 000yen