Products Catalog

Specification

Batch mill for 2 different grinding procedures:
Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 ( incl. with delivery) .
Cutting grinding for pulverizing soft, fibrous materials with a cutting blade ( not incl. with delivery) .
- Moist and gluey materials can be pulverized by adding water
- Grinding chamber made of Tefcel ( PTFE, glass fiber-reinforced) with stainless steel inlet ( 1.4571) , useful volume 80 ml ( incl. with delivery) . For embrittlement of grinding materials with liquid nitrogen in the grinding chamber
- Optionally, a 250 ml grinding chamber is available

Technical Data
- Process type: batch
- Operating principle: cutting/ impact
- Motor rating input: 160 W
- Motor rating output: 100 W
- Speed max.: 28000 rpm
- Circumferential speed: max. 53 m/ s
- Usable volume max.: 80 ml
- Feed hardness max.: 6 Mohs
- Feed grain size max.: 10 mm
- Material beater/ cutter: stainless steel 1.4034
- Material milling chamber: stainless steel 1.4571
- Power-on time ON: 1 min
- Power-om time OFF: 10 min
- Milling chamber, can be cooled with water: no
- Mill feed can be cooled in milling chamber with dry ice: yes
- Mill feed can be cooled in milling chamber with liquid nitrogen: yes
- Dimensions ( W x H x D) : 85 x 240 x 85 mm
- Weight: 1.5 kg
- Permissible ambient temperature: 5 - 40 ° C
- Permissible relative moisture: 80 %
- Protection class according to DIN EN 60529: IP 43
- Voltage: 220 - 240 / 100 - 115 V
- Frequency: 50/ 60 Hz
- Power input: 160 W