Model: SRT6210 FEATURES This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate. SPECIFICATIONS Display 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/ 0.020-629.9uinch Rz, Rt: 0.020-160.0um/ 0.078-6299uinch Accuracy: d± 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN( 0.4gf) Probe Angle: 90° Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/ 0.7inch Cutoff length ( l) : 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: sampling length = 0.25mm Vt= 0.135mm/ s sampling length = 0.8mm Vt= 0.5mm/ s sampling length = 2.5mm Vt= 1mm/ s returning Vt= 1mm/ s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001¼ m if reading 10¼ m 0.01¼ m if 10¼ mdreading 100¼ m 0.1¼ m if reading e100¼ m Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~ 50 Humidity