Products Catalog

Specification

Seta Reid Vapour Pressure Bath
Part Number 22210-3
The Seta Reid Vapour Pressure Bath is a floor standing water bath specifically designed for the determination of vapour pressure with Seta Reid or Seta Vapour pressure cylinders.
The stainless steel 80 litre water bath has a temperature range of ambient + 5° C to 90° C and can achieve a test temperature of 37.8° C ( 100° F) with a uniformity of ± 0.1° C ( 0.2° F) .

A programmable, digitally controlled thermostir unit combines the functions of heater, temperature controller, timer and stirrer. The thermostir unit is equipped with an RS 232 port, a switched output for an external relay, a socket for an external PT100 temperature probe and alarms and cut-outs for low fluid level and over-temperature.

The 22210-3 will accept up to four 22410-0 and up to six 22400-0 Seta Vapour Pressure Cylinder / Ullage Chamber assemblies.

Supplied with: 4 pressure cylinder mounting brackets, mains lead and instruction manual.

SPECIFICATIONSTest Temperature Range ambient + 5° C to 90° C ( 9° F below ambient to 194° F)
Temperature Uniformity ± 0.1° C @ 37.8° C
Bath Volume 80 litre
Bath Fluid Water ( De-ionised)
Cylinder Capacity Up to 6 cylinder assemblies
Voltage 220/ 240V, 50/ 60Hz
Power 2.2kW
Size ( HxWxD) 77 x 55 x 51cm
Weight 70kg
CCCN Code: Tariff 90278097

FLASHPOINT

VAPOUR PRESSURE

DISTILLATION

VISCOSITY

BIOFUELS

PARTICULATES

KEYWORD SEARCH

CATEGORY SEARCH

METHOD SEARCH

FUEL SPEC SEARCH

Forgotten your password?
Register for the User Area

FEATURESAccepts up to 6 pressure cylinder assemblies
Temperature range ambient + 5° C to 90° C ( 194° F) ± 0.1° C
Uniformity better than ± 0.1° C @ 37.8° C ( ± 0.2° F @ 100° F)
Digital temperature control
Low fluid level and over-temperature protection
METHODSASTM D1267, ASTM D323 Procedures A, C & D, ASTM D4953 Procedure A, BS 2000 Parts 69, 402 ( obs) & 410, EN 12 ( obs) , FTM 791 1201, IP 402 ( obs) , IP 410, IP 69 Procedures A, C & D, ISO 3007, ISO 4256, JIS K2258, NF 12 ( obs) , NF M07-007, NF M41-010

DETAILS OF METHODSJIS K2258 Vapour Pressure
BS 2000 Parts 69, 402 ( obs) & 410 Petroleum products - Determination of vapour pressure - Reid method
ASTM D1267 Standard test method for gauge vapour pressure of liquefied petroleum ( LP) gases ( LP - gas method)
IP 410 Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method ( ISO 4256: 1996)
ISO 4256 Vapour Pressure of Liquefied Petroleum Gases
ASTM D4953 Procedure A Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends ( Dry Method)
IP 402 ( obs) Vapour Pressure of Petroleum Products ( Reid Method)
ISO 3007 Vapour Pressure of Petroleum Products ( Reid Method)
EN 12 ( obs) Vapour Pressure of Petroleum Products ( Reid Method)
FTM 791 1201 Vapour Pressure of Petroleum Products ( Reid Method)
NF 12 ( obs) Vapour pressure
ASTM D323 Procedures A, C & D Standard test method for vapor pressure of petroleum products ( Reid Method)
IP 69 Procedures A, C & D Petroleum products - Determination of vapour pressure - Reid method
NF M07-007 Vapour Pressure of Petroleum Products ( Reid Method)
NF M41-010 Vapour Pressure of Liquefied Petroleum Gases