This series is used for removing the sand and the oxided surface of the workpieces such as the casting, forging as well as the weldment.Owing to the perfect protective measures, ....

The machinery type of this series fits for cleaning up section steel , , steel structure , I-steel board architectural machine and other large jointing mechanical part .It is....

This series uses multiple-step and rotating point fixed method to clean away the antiquated sand and oxidation layer from the surface quickly, and makes the surface bright and....

This series for the hook type shot blasting cleaning machine, is mainly used for casting. structural, non-ferrcus alloy parts and other parts of the surface cleaning, shot....

This series is used for surface cleaning, rust romoving, and surface intensification of each kind of middle and small scale casting, forging and job. It is suitable for diffenent....

Chemical composition
( C) 0.70-1.20%
( Mn) 0.35-1.20%
Si) 0.40-1.20%
( S) less than0.05%
( P) less than0.05%
Hardness
Normal 40-50HRC
Special 52-60HRC
Durality 2000-2800 times....

There are three kinds of steel grits that our company supplies: GH, GP, GL which includes G10, G12, G14, G16, G18, G25, G40, G50, G80, G120

Products Steel grit
Chemical Composition C 0.70....

Blast cleaning of Steel cut wire: Used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, H type steel, steel structure.
Rust removal of....

It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, unknit, strengthen, prevention rust before painting of metal die-casting, precision....

Chemical Composition £  º Zn ¡ à � 99%
Microhardness £  º 45 ¡  « 50HV
Tensile Intensity £  º 90 ¡  « 120Mpa
Durability £  º 6000 Times
Microstructure Deformed  ¦ à �
Density £  º 7.1g/ cm3
Bulk....

Packing: 25kgs/ bag, 40bags/ ton/ pallet or 1000kgs/ big bag
Chemical Composition: Al> 99%
Microhardness: 45Â ¡ Â « 50HV
Tensile Intensity: 80Â ¡ Â « 240Mpa
Durability: 6500 Times
Microstructure....

SUS304, SUS430 SUS410 Stainless steel cut wire shot and stainless steel shot
Size: 0.3mm-1.5mm
Hardness: HVC400-600
Chemical elements: C:  ¡ à œ 0.12% ; Gr: 17-19% ; Ni: 7-10% ; S:  ¡ à ....

SUS304, SUS430 SUS410 Stainless steel cut wire shot and stainless steel shot
Size: 0.3mm-1.5mm
Hardness: HVC400-600
Chemical elements: C:  ¡ à œ 0.12% ; Gr: 17-19% ; Ni: 7-10% ; S:  ¡ à ....