Welcome to
SHANGHAI JIANGXI METALS CO., LTD.
Free Member
SHANGHAI JIANGXI METALS CO., LTD.
China
China
Company Profile
| Company Contact | ||
|---|---|---|
| Name: | Mr. Tony Wu [Sales] | |
| E-mail: | Send Message | |
| Homepage: | ||
| Phone Number: | ||
| Fax Number: | ||
| Address: | 718 Huamu Rd, Pudong Dist,Shanghai, China. Shanghai 201204, Shanghai China | |
| Average User Review | There is no review for this company - Write a review | |
| Registration Date: | May. 24, 2023 | |
| Last Updated: | Jun. 27, 2006 | |
| Business Nature: | Manufacturing of Mineral, Metals & Materials category | |
Want to contact this company?
| ||
Put on Company Partner | ||
| Recommend to your friends | ||
| Company Brief | ||
We specialize in refractory metals, for research & development. Molybdenum, Tantalum, Tungsten, Niobium & Zirconium , are available in all forms such as ribbon, foil, sheet, wire, rod, strip, bar, plate, capillary tube, sputtering target, tubing & powder. - PURE TANTALUM - Tantalum rod ( ASTM B365 - 92 R05400) Diameter: 4.0 up to 95mm max. x random length. - Tantalum wires ( ASTM B 365 - 92 R05400 + ASTM F560) Dia 0.15 up to 3.0mm x coil ( at random length) - Tantalum plate, sheet( ASTM B708 - 98 R05200) Thick 0.2 up to 1.0 mm x Width up to 500mm max x Length Thick 1.0 up to 20mm x Width up to 650mm max x Length - Tantalum foil ( ASTM B708 - 98 R05200) Thick 0.025 up to 0.05mm x Width 100mm max. x Length - Tantalum Strips ( ASTM B708 - 98 R05200) Thick 0.05 up to 0.1mm x Width up to 130mm max. x Length - Tantalum seamless tube( ASTM B521 - 98 UNS Grade R05200) Tantalum capillary tube/ pipe ( ASTM B521 - 98 UNS Grade R05200) OD1.0 up to 2.0 mm x WT 0.2 up to 0.35 mm x Length 1 meters max. Tantalum seamless tube/ pipe( ASTM B521 - 98 UNS Grade R05200) OD2.0 up to 38 mm x WT 0.2 up to 5 mm x Length 6 meters max. - Tantalum welded tube( ASTM B521 - 98 UNS Grade R05200) OD10 up to 38 mm x WT 0.2 up to 5 mm x Length 6.20 meters max. - TANTALUM ALLOY - Tantalum alloy( Ta10% W, Ta-10W, Ta10W) rod ( ASTM B365 - 92 R05255) Diameter: 4.0 up to 95mm max. x random length. 90% tantalum, 10% tungsten; Tantalum alloy( Ta2.5% W, Ta-2.5W, Ta2.5W) rod ( ASTM B365 - 92 R05252) Diameter: 4.0 up to 95mm max. x random length. 97.5% tantalum, 2.5% tungsten; - Tantalum alloy ( Ta10% W, Ta-10W, Ta10W) wires ( ASTM B 365 - 92 R05255) Dia 0.15 up to 3.0mm x coil ( at random length) 90% tantalum, 10% tungsten Tantalum alloy ( Ta2.5% W, Ta-2.5W, Ta2.5W) wires ( ASTM B 365 - 92 R05252) Dia 0.15 up to 3.0mm x coil ( at random length) 97.5% tantalum, 2.5% tungsten -Tantalum alloy ( Ta10% W, Ta-10W, Ta10W) Sheet ( ASTM B708 - 98 R05255) Thick 0.1 up to 20mm x Width up to 140mm x Length 90% tantalum, 10% tungsten Tantalum alloy ( Ta2.5% W, Ta-2.5W, Ta2.5W) Sheet ( ASTM B708 - 98 R05252) Thick 0.1 up to 20mm x Width up to 140mm x Length Tantalum 97.5% , Tungsten 2.5% - Tantalum alloy ( Ta2.5W, Ta-2.5W, Ta2.5W) seamless tube( ASTM B521- 98 UNS Grade R05252) OD2.0 up to 38 mm x WT0.2 up to 5 mm x Length 6 meters max. - Tantalum alloy ( Ta10W, Ta-10W, Ta10W) welded tube( ASTM B521 - 98 UNS Grade R05255) OD10 up to 38 mm x WT 0.2 up to 5 mm x Length 6 meters max. - PURE NIOBIUM - Niobium rod( ASTM B392 - 95) Diameter : 95mm max. x random length. - Niobium wires ( ASTM B 392 - 95) Diameter 0.5 up to 3.0mm x R/ L in coil - Niobium plate( ASTM B393 - 95 R04210) Thick 0.1 up to 20mm x Width x Length - Niobium sheet( ASTM B393 - 95 R04210) Thick 0.076 up to 0.15mm x Width 5 up to 12mm x Length ( 500gram/ spool) - Niobium foil( ASTM B393) Thick 0.05 up to 0.10mm x Width 5-13mm x Length - Niobium seamless tube( ASTM B394 - 99) Niobium capillary tube/ pipe ( seamless) OD1.0 up to 2.0 mm x WT 0.2 up to 0.35 mm x Length 1 meters max. Niobium tube/ pipe ( seamless) OD 2.0 up to 12.7 mm x WT 0.2 up to 5 mm x Length 6 meters max. - Niobium tubing ( welded) OD 10 up to 38 mm x WT 0.2 up to 5 mm x Length 6 meters max PURE MOLYBDENUM PLATE MO 99.8% MIN SIZE : THICKNESS 15MM x WIDTH 60MM x LENGTH 160MM Advantages of Mo for high temperature applications: High melting-point; Low vapour pressure; High hot-strength; Low thermal expansion; Low heat capacity; High thermal conductivity; High elastic modulus; Typical areas of application: Molybdenum spray wire for the automotive industry; Molybdenum spray dimming shields for automotive lighting; core- and support wires for the lighting technology; Molybdenum spray electrodes for the melting of glass; Molybdenum spray boats and coils for resistive evaporation; Molybdenum spray sputtering targets for the coating technology; Semiconductor base plates for performance electronics. ----Available form--- Tungsten bar & Tungsten plate-alloying additive Specs : W 99.8% min Fe 0.02% max Si 0.015% max Ca 0.015% max Al 0.005% max Mg 0.005% max Ni 0.01% max Sb 0.0001% max As 0.001% max Sn 0.001% max Mo 0.002% max P 0.001% max C 0.005% max O 0.02% max Size : Tungsten bar ( square type) ( 12-15) mm x ( 12-15) mm x ( 500-600) mm Tungsten plate Thickness ( 20-50) x Width( 80-180) x L 350mm Application: used as alloying additive in special steel and nonferrous alloys. Carbide Grade powder ( RTP) called ready to press powder is free-flowing granules which are the basic materials of sintered cemented carbide products. After ball milled, fully mixed and spray dried, the powders are shaped into spherical granules with excellent flow-ability. Each granule contains the constituents of a specified grade, such as tungsten carbide, cobalt, nickel, titanium carbide and other additives with a binder & lubricant. We manufactures a wide array of blended tungsten carbide-cobalt powders in both unpelleted and ready-to-press forms. Unpelleted blends are popularly used as starting material for finished hardfacing powders. Ready-to-press blends, which are made with a proprietary agglomeration process, offer ease of compaction, improved sinterability, and low porosity. ---Available form--- Cemented carbide grade powder or Ready-To-Press powder ( RTP) : Specifications : YG3 ( WC 97% + Co 3% ) , Density : 15.1-15.4% , Hardness : 91.5 HRA TRS : 1400 MPa; YG6 ( WC 94% + Co 6% ) , Density : 14.8-15.0% , Hardness : 91.0 HRA TRS : 1700 MPa; YG8 ( WC 92% + Co 8% ) , Density : 14.7-14.9% , Hardness : 89.5 HRA TRS : 2000 MPa; YG8C ( WC 92% + Co 8% ) , Density : 14.7-14.9% , Hardness : 87.5 HRA TRS : 2200 MPa; YG11C( WC 89% + Co 11% ) , Density : 14.4-14.6% , Hardness : 86.5 HRA TRS : 2400 MPa; Cobalt Sulphate Co 20.40% min Mn 0.02% max Cu 0.01% max Fe 0.008% max Mg 0.16% max Ca 0.06% max Na 0.05% max Insolubles 0.02% max Material: Cobalt Sulfate ( Co 20.5% min) Specs : Guarantee Typical Co 20.50% min 20.75% Ni 0.002% max 0.001% Fe 0.003% max 0.001% Cu 0.004% max 0.001% Mn 0.005% max 0.001% Zn 0.005% max 0.001% Cd 0.002% max 0.0016% Pb 0.002% max 0.001% As 0.002% max 0.001% Water insoluble : 0.03% max 0.01% max Packing : inner plastic woven bag of 25 kgs net each. Material: Cobalt Sulphate ( Co 21% min) Specs : Guarantee Typical Co 21% min 21.04% Ni 0.001% max 0.001% Fe 0.0008% max 0.0006% Cu 0.0003% max 0.0002% Mn 0.0005% max 0.0002% Zn 0.0003% max 0.0002% Mg 0.001% max 0.001% Na 0.0015% max 0.001% Ca 0.001% max 0.001% Si 0.0025% max 0.001% Pb 0.001% max 0.001% As 0.001% max 0.001% Water insoluble : 0.01% max 0.01% Packing : inner plastic woven bag of 25 kgs net each ZIRCONIUM ( BASIC) CARBONATE SPECIFICATION OF THE PRODUCT Zr( Hf) O2 40% min Na2O 0.15% max Fe2O3 0.002% max SiO2 0.03% maxx TiO2 0.001% max ZIRCONIUM ( BASIC) CARBONATE Molecular Formula: ZrOCO3.nH2O Packing: 25 kg or 1000 kg in woven bags; or packed as specified by the client. Appearance: white powdery solid Applications: in pharmaceuticals, cosmetics and paints; or as intermediate for other zirconium salts | ||
| Major Products / Services | ||
| ||
| ||
www.jxmetals.com
You have [3] new inquiries. Go to Member MenuHome - Trade List - Product List - Inquiry List - Cooperation List - Company List Copyright © 2024 Indomonster.com. All Rights Reserved. |