Seller:
- reinforced graphite gasket
Gasket, also known as graphite reinforced composites from high-strength flexible graphite gasket reinforced composite plate by precision cutting, with the packet can be processed into a side edge of outsourcing. With good sealing performance and operability, and low pre-pressure and non-stick used in the flange sealing surface, the installation of easy-to-use pads. To adapt to hot water, high temperature, high pressure steam, hydrogen, ammonia, solvents, hydrocarbons, such as ultra-low temperature liquid medium.
Applicable to all kinds of pipes, valves, pumps, heat exchangers, condensers, pressure vessels, towers manhole, hand hole sealing flange connections, and water level gauge, level gauge, such as gasket mold.
- spiral wound gasket
Metal spiral wound gasket is a semi-metal flat gasket which is made of metal and non-metallic composite materials with spiral. With good compression rebound performance, a multi-channel seal and a certain degree of self sealing feature tight, less sensitive to the surface defects of the fang surface, on-bounding flange sealing surface, easy on, therefore, easy disassembly, It can be part of the elimination of pressure, temperature change and the effects of mechanical vibration. It can keep its excellent sealing performance under the alternating cycle of various harsh conditions such as in high temperature, low temperature, high vacuum, shock and vibration etc.
Widely used in many industries piping such as petroleum, chemical, gas, machinery, metallurgy, electric power, shipbuilding etc as well as the sealing flange junction such as valves pumps pressure vessels, condensers, towers, manholes etc.
- Serrated metal gasket
Serrated metal gasket selection of mild steel, carbon steel, copper, stainless steel, chromium steel, monel alloy steel, alloy of aluminum and other metal plate or rod by mechanical processing, surface processing into an angle between the ring gear. Can increase the inner, outer ring position. In order to protect the sealing flange and effective, you can paste in the gasket sealing surface layer, the material choice of PTFE, graphite and so on..
- PTFE gasket
PTFE gasket also known as Teflon gaskets, It is sintering from after Used mold suppress PTFE resin, Or used PTFE rods, tubes, plates by mechanical turning or by cutting. The gasket has excellent corrosion resistance and good self-lubrication, non-adhesive, It is resistant to almost all chemical media.
Used in petroleum, chemical, metallurgical, mechanical, electrical and other corrosive media pipeline, pump, valve flange seal all types of equipment. Pure PTFE gasket is also a clean sealing products, will not come into contact with the formation of any contaminated material, can be widely used in food, medicine and industry. At the same time as insulating materials are widely used in the electronics industry.
Improved PTFE Gasket uniformly adds filling material as
- PTFE envelope gasket
PTFE envelope gasket is made of a thickness of 0.5 - 1mm ring gasket, put in the incision core material (Asbestos or rubber sheet , etc.) section for the "Y" or "U"-shaped pad package. The PTFE gasket maintain strong corrosion resistance and have high resilience, excellent sealing performance, Can be applied to petroleum, chemical, power, pharmaceutical, food and other industrial equipment connection flange of the static seal
a. dissection cut Y-type
have one coating, for the level of flat metal, ceramics and glass sealing surface with good results. Also known as Y-type cross-section of the package pad. Turning into a tube material with 0.8MM-- 1MM thin ring, the center of the thickness from the lateral incision, the incision in the Add core material, incision open hole to within about 1.5 --- 2.0MM.
b. folding U-type
This gasket coated by machine, the core material is generally compressed Asbestos sheet or rubber plate. Outsourcing for the 0.4-0.5MM thick strip of PTFE film, heat sealing it at both ends in the ring after the package outside of the core material was U-shaped.
- Corrugated Metal Gasket
The corrugated metal gasket is made with a specific processing technology, molding or lathe cutting into the wave-shaped pads that can increase the inner, outer ring or outer ring positioning. Paste the surface of flexible graphite, high temperature, low temperature resistance, corrosion resistance and good compression resilience, applied to pipes, valves, pumps, pressure vessels, heat exchanger, tower, manhole sealing parts such as flanges. Material: A3, 304, 316, 316 L, etc..
- PTFE rod
PTFE rod PTFE suspended resin selected extrusion process made by the plunger. In the known plastics PTFE has the best chemical corrosion resistance, low friction and dielectric properties, non-aging, non-stick, in the absence of load cases can be -180% ¡ã C - +260 ¡ã C temperature. For electrical insulation parts, sealing gaskets, anti-material
- PTFE packing
PTEF packing is a stuffing packing which is made of PTFE Resin by special processing and by waving into Rectangular cross-section £¬It is neither impregnating PTFE emulsion not dealt with Lubricants, thus not including other additives, widely used in chemical industry (except gaseous fluorine and alkali), pharmaceutical, food, chemical industries, papermaking, good chemical stability.
Because of its good lubricity and not sticky, thus it not only has excellent teflon flexible, good rebounds but also has excellent corrosion resistance, it almost can accommodate all chemical medium. Used in petroleum, chemical, food, pharmaceutical and power such as industrial equipment of the flange seal, pump and valve seal.
In the core of the packing, coupled with high elasticity of silicone rubber (Silicon sponge) as the core of silicon, it has excellent softness, high compression rate and resilient rate.
Temperature: -200 ¡æ - +260 ¡æ
Pressure :0-30 .0 Mpa
Specifications for: 3 ¡Á 3-50 ¡Á 50mm
PH value of 0-14
- Graphited PTFE Packing
Graphite PTFE Packing with Kevlar Corners is used aramid fiber and black PTFE as raw materials , it is manufacture by special mix woven process, high intensity of aramid fiber materials were coated in four corners of the packing , make the products more wear-resisting. It combines with DuPont Kevlar fiber abrasion resistance, low friction of black PTFE fiber and excellent performance of heat conduction. Applies to relatively high line speed and high medium pressure of reciprocating pumps, mixer, Blender, reactor, valve dynamic seal.
Widely used in chemical, agricultural chemical, petrochemical, pharmaceutical, sugar, papermaking, electric power industry.
Temperature: -240 ¡æ - +280 ¡æ
Pressure :0-30 .0 Mpa
Specifications for: 3 ¡Á 3-50 ¡Á 50mm
PH value of 0-14
- Flexible Graphite Sheet
Flexible graphite (board) material is made of natural flake graphite as raw materials by certain chemical processing, high inflation and the instantaneous rolling, It is a manufacturing graphite composite plate, graphite Strip, graphite packing and sealing gasket, such as the foundation materials of graphite sealing. it can also be used directly in the low-pressure observation flange holes, water level tables, case cover and other part of the sealing etc. it has such advantages as high-temperature resistance, corrosion resistance, radioactive, self-lubricating, not permeability and each wizard sexual etc.
Temperature: -200 ¡æ - +1650 ¡æ in the non-oxidative medium -200 ¡æ - +850 ¡æ medium in the oxidation
Pressure :0-10 .0 Mpa.
Available specifications: thickness with
(Volume) material: 0.15mm ~ 1.5mm
Plate: 0.2mm ~ 3.0m width of 100mm ~ 1500mm
- PTFE Fiber Packing
PTEF packing is a stuffing packing which is made of PTFE Resin by special processing and by waving into Rectangular cross-section £¬It is neither impregnating PTFE emulsion not dealt with Lubricants, thus not including other additives, widely used in chemical industry (except gaseous fluorine and alkali), pharmaceutical, food, chemical industries, papermaking, good chemical stability.
Because of its good lubricity and not sticky, thus it not only has excellent teflon flexible, good rebounds but also has excellent corrosion resistance, it almost can accommodate all chemical medium. Used in petroleum, chemical, food, pharmaceutical and power such as industrial equipment of the flange seal, pump and valve seal.
In the core of the packing, coupled with high elasticity of silicone rubber (Silicon sponge) as the core of silicon, it has excellent softness, high compression rate and resilient rate.
Temperature: -200 ¡æ - +260 ¡æ
Pressure :0-30 .0 Mpa
Specifications for: 3 ¡Á 3-50 ¡Á 50mm
PH value of 0-14
|
|