Specification :

JK-EDS-2000W high-power electric mixer
Characteristic:
This product series excited motor single phase motor, transmission part of the low noise of the gear box, adjust the speed using the excellent feedback electronic speed control. Advanced manufacturing technology, this product is small, light weight, high starting torque , output power, low noise, smooth speed control, the use of reliable, easy to use and so on.
Basic Specifications:
1. Motor output power 2000W
2. Supply Voltage 220V
3. Frequency 50Hz
4. Speed range 0-1000r/ min
5. Maximum mixing capacity 200 l
6. Dimensions 60* 80* 120 cm
7.Weight 50kg
Use:
1.Check out if the power supply voltage and rated voltage of the mixer are consistent with
2.Lead the motor connected with the electronic governor
3.Check Whether speed control knob is in the beginning , Should not be fitted with stirring bar to ensure safety.Plug in the power plug, open the electronic governor the power switch, if start phenomenon, starting with a screwdriver bit to 0 transfer, transferred the motor clockwise 60r/ min, speed is uniform, such as the steady speed can be used.
4.Stirring bar installed in the Stirring bar on the head, immediately after clamping into mixing.
Maintain:
1.The power cord with three-core sheathed wire cable, which a yellow wire should be firmly grounded to ensure safety
2.Check brushes and replacement brushes should first disconnect the power, change into the new brush should be able to slide freely in the brush tube, tighten the brush cap.
3.In the event of a serious spark, must immediately stop inspection, to be repaired to avoid greater losses
4. Use of the process, must wear good protective equipment to prevent the material ejected.