FLUKE 789 Digital Proces Meters
Specification
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now itâ s even better, the range is extended with the new Fluke 789 â the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features :
* 24 V Loop power supply
* Very large dual display
* Enhanced backlight with 2 brightness settings
* 1200 Ohm drive capability on mA source
* HART mode setting with loop power and a built-in 250 ohm resistor
* 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
* Externally accessible fuses for easy replacement
* Infrared-port to process data in FlukeView Forms ( V2.1) software
Fluke 789 features that are also included in the Fluke 787
* Precision 1000 V, 440 mA True-RMS digital Multimeter
* 0.1% dc voltage accuracy
* 0.05% dc current accuracy
* Frequency measurement to 20 kHz
* Min/ Max/ Average/ Hold/ Relative modes
* Diode Test and Continuity Beeper
* Simultaneous mA and % of scale readout
* 20 mA DC current source / loop calibrator / simulator
* Manual Step ( 100% , 25% , Coarse, Fine) plus Auto Step and Auto Ramp
* Externally accessible battery for easy battery changesThe Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now itâ s even better, the range is extended with the new Fluke 789 â the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features :
* 24 V Loop power supply
* Very large dual display
* Enhanced backlight with 2 brightness settings
* 1200 Ohm drive capability on mA source
* HART mode setting with loop power and a built-in 250 ohm resistor
* 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
* Externally accessible fuses for easy replacement
* Infrared-port to process data in FlukeView Forms ( V2.1) software
Fluke 789 features that are also included in the Fluke 787
* Precision 1000 V, 440 mA True-RMS digital Multimeter
* 0.1% dc voltage accuracy
* 0.05% dc current accuracy
* Frequency measurement to 20 kHz
* Min/ Max/ Average/ Hold/ Relative modes
* Diode Test and Continuity Beeper
* Simultaneous mA and % of scale readout
* 20 mA DC current source / loop calibrator / simulator
* Manual Step ( 100% , 25% , Coarse, Fine) plus Auto Step and Auto Ramp
* Externally accessible battery for easy battery changes
indosupply.web.id
