Specification :

HiPath 3000 –
scenario overview
HiPath 3000 offers a number of communication
options for small and medium-sized
businesses. Access to the public network
takes place via analog or ISDN network operators
or via Internet telephony connections
to alternative Internet ( telephony)
service providers ( ISP/ ITSP) . IP telephones
with integrated mini-switches can be
smoothly integrated into an existing LAN
infrastructure via the " one wire to the desk"
concept. Cordless communication for both
voice and data applications is also possible
using WLAN base stations. Digital system
telephones ( UP0/ E) can be combined with IP
telephones and updated or replaced. Traditional
analog phones, fax machines, and
entrance telephones or cordless phones
based on a DECT solution can also continue
to be operated. Voicemail* * is already integrated
in smaller systems. For requirements
on a larger scale, the integrated
HiPath Xpressions Compact* solution offers
voicemail boxes with a number of feature
ranges and with a menu-guided AutoAttendant
function) . The CSTA ( Computer Supported
Telecommunications Applications)
interface is available for all HiPath 3000
models for decentralized ( 1st-party) and
central, server-based ( 3rd-party) CTI solutions.
Additional server-based solutions for
Unified Messaging and Contact Center solutions
via standardized application interfaces
serve to accelerate business
processes and increase productivity.
* not HiPath 3800
* * optional solution components
System interfaces
On the network side
Euro ISDN
� S0 basic rate interface with DSS1 protocol
– System connection
– Point-to-multipoint connection
� S2M primary rate interface with DSS1
protocol
US-ISDN
� Basic rate interface ( BRI) and primary
rate interface ( T1/ PRI)
Analog trunks
� Analog trunk connection without direct inward
dialing ( DDI/ DID) with CLIP support
ITSP ( Internet Telephony Service Provider)
support via SIP
� System connection
� User connection
On the user side
Analog
� For connecting analog terminals such as
fax, telephones, modem.
Digital
� For connecting digital two-channel system
telephones ( UP0/ E)
� For connecting DECT base stations
Euro ISDN
� S0 user bus for up to 8 independently
powered terminal devices
( e .g. Group 4 fax, ISDN-PC card)
HG 1500
� 2x10/ 100BaseT interface /
10/ 100 Mbit/ s
Gateway for integration in LANs
Connection to internal LANs or Internet
via ISDN and DSL interfaces
Other interfaces
V.24
� For connecting service PCs, call charge
computers, call charge printers
V.24 with CSTA protocol
� For connecting external applications, in
the hospitality or health care sectors,
for example.
E& M interface
( HiPath 3800)
S0FV, S2MFV or PRI with CorNet-N, Cor-
Net-NQ and QSig protocols
� Permanent digital connection
LAN interface
� 10 Mbit for system administration via
TCP/ IP
Technical data
Power supply
Systems, by default, are designed for mains
operation. Possible power outages can be
optionally bypassed with an uninterruptible
power supply ( UPS) .
Rated input voltage ( AC) 88 - 264V
Rated frequency 50/ 60 Hz
Battery supply ( DC) -48 V
Environmental/ operating
conditions
Temperature: + 5 ° C to + 40° C
Relative humidity: 5 - 85%
Range
Between HiPath 3000 and system telephone:
500 m max. Up to approx. 1, 000 m
with plug-in power supply unit, depending
on line network.
Between networked HiPath systems on
premises belonging to the company:
� S0 permanent connection approx. 1, 000 m
� S2M permanent connection 250 m max.,
depending on line network.
Installation of network adapters is necessary
for increasing range.
The ranges in the Deutsche Telekom public