Specification :

Detail:

TREATMENT THEORY

The Er: bium Glass fractional laser skin reconstruction system adops fiber laser with 1550nm wavelength and installs a CPG which is arranged in matrix scanning output, emitting 50um-80um spot through a high focusing lens, the target tissue is water in the dermis, forming matrix-like hole( 0.12mm) around focal spot penetration directly . The penetration depth of these small spots is about 2mm ( the depth is related with solar elastic fibrotic maximum depth) .At this point the normal tissue among holes generates heat bridge which starts wound rehabilitation reachion and thermal effects between scarfskin and dermal tissue, then experiencing inflammation phase, proliferation phase, remodeling phase.During or cosmetic essence can be applied into the wound rehabitation reaction, 1 hour after laser irradiation , the dermal fibous tissue arranged dense, few inflammatory cells soakage, after 3 days proliferation of epidermal cells, inflammatory cells of dermal layer and fibroblast cells are increased .7 days fibroblasts in dermal layer is increased significantly, 15 days increasing in collagen synthesis, dermal thickening.After laser irradiation there is a certain effect for skin elasticty, skin hemoglobin content, water loss through the skin, sebum content, skin moisture content but no impact on the skin melanin content.

Application

1. Patients with mild to moderate photoaging: Rough skin, large pores, fine wrinkles, skin aging loose

2.Wrinkles caused by sunlight or early aging wrinkles, on the lower eyelid, forehead, cheek as well as crow' s-feet.

3.Face lifting and tightening.

4. Acne scar treatment.

5. Firm up skin stone.

YILIYA-1550A Advantage

1.The target tissue is water, no skin type limit( Fitzpatrick I-VI) .

2.The output spot diameter is 50-80 um, less thermal ablation and deeper penetration, no scab, no pigmentation, no scar , more safe and effective treatment.

3.Random scanning avoids thermal damage caused by heat accumulation, reducing pain of treatment.

4.Applied1550nm fiber laser from IPG, themaximum output power is 35W which is 2-

3 times of similar equipment, ensuring a deep penetration and long life time.

5.Six scan patterns ( Circle / Triangle/ Square/ Rectangle / Rhombus / Line) are available via CPG for different parts of skin, satisfying different the rapistsunique request.

6.Laser output spot size, energy density, scan pattern, scanning speed, spot density, scanning area are adjustable, which we recontrolled by the computer operating system for various lesions, the tissue can be gasifiedat different depths ( 50-2000um) , to ensure a more accurate treatment.

7.The YILIYA-1550 can be equipped with different laser power of 15W, 25W and

35W.The doctors can choose the most appropriate lase rpower according to treatment.

YILIYA-1550 SPECIFICATION

- - - -
Lasertype | Er: BuimGlassfiberlaser | Wavelength | 1550nm |
OpticalBeamQuality | TEM | MaximumOutputPower | 30W/ 20W/ 10W( optional) |
Power of theAiming Beam | 5mW | Spot Diameter | 50-2000m |
Scanning Mode | Randomized Scanning | Aiming Beam | 635 nm |
Cooling | Air Cooling | Pulse Energy | 10mj~ 200mj ( stepping: 2mj) |
Spot Pattern | Triangle/ Square/ Rectangle / Rhombus / Round | Pulse Interval | 2ms~ 100ms ( stepping: 1ms) |
Scan Area | 55mm, 2.52.5mm, 1.251.25mm 3030mm2020mm 1010mm | Weight | 33KGS |
Gross Weight | 76KGS | SpotDensity | 36spots/ cm2, 144spots/ cm2, 576spots/ cm2 |
Power Supply | AC 220V 50Hz/ AC 110V 60Hz | Dimensions ( before packaged) | 650mm340mm760mm |
Dimensions ( After Packaged) | 900mm470mm1000mm | | |
- - - -

Model Number: YILIYA-1550A
Brand Name: HONKON
Payment Terms: T/ T
Minimum:
Certification: Medical CE
Delivery Time: 10-15 working dya
Supply Ablity: