Specification :

HONGDU TESTING EQUIPMENT CO., LTD.
HD-10B Power Plug Integrated Tester

Product explanation:
This tester is a integrated tester for plug.It is used to test the continuity, insulation, high-volt, leakage current of power plug.It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc.It is a totally automatic testing machine make your operation more convenient and simple.

Features:
* All of the test subjects will done automatically.
* The inner/ outer high-volt output value and persistence time can be adjusted separately.
* Test speed is quick, all test subjects will be achieved less than 2 seconds.
* The PLC control system is come from Mitsubishi, Made In Japan.
* The relay is come from Schneider, Made In French.
* If the specimen is incompetent, there is a alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent.After you push the emergency button it will restart a new test.And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operators can not restart this machine, only after the managers have checked over and restart it by key the machine will be working again.
* When test over, the sample will be pushed out automatically, and a “ T� or other characters will be marked on it( English characters only) .
* Cord set which both have a plug and socket can be tested by this machine.

Technical parameter:
Polarity test Test E, L, N wires in sequence
Insulation test high-volt DC 500V + -10%
Insulation resistance 2, 7, 20, 50, 100M© ( can be made to order)
Inner high-volt 0~ 5KV + -5% ( adjustable)
Outer high-volt 0~ 5KV + -5% ( adjustable)
Leakage current 0.5, 1, 3, 5, 10mA( can be made to order)
Rated power 500VA
Cylinder power compressed air with 0.4 to 0.6Mpa
Dimensions 750mm W, 540mm D, 520mm H
Power source AC 220V + -10% , 50Hz
Weight 40 kg, approximate

NOTICE:
1, Inner high-volt is applied between L, N, E wires, and the outer high-volt is applied between L, N, E wires and jacket.
2, Both 3-wire and 2-wire power plug can be tested by this machine.

Test Objects:
Power Plugs