Specification :

Universal 10.4inch LCD Upgrade
Universal 10.4inch LCD Upgrade ( instead of 10.4inch, 12inch CRTs) CNC Monitor
Model No.: HC-1011104

A CRT can be unreliable and can be down for days at a time
when you need it the most. When a CRT burns out, installing
an LCD upgrade is the fastest and most reliable way to get a
machine controller up and running. LCD upgrades are 100%
compatible with old video connections such as BNCs, 15 pin,
9 pin, 8 pin, VGA, CGA, 10 pin edge connectors, and many
others.

Fanuc crt monitor equivalent replacements such as the
a61l-0001-0074, as mitsubishi crts, matsushita monitors,
tatung displays, totoku screens, toshiba and hitachi crt monitor
for fanuc controls, mazak, yamazaki and mazatrol based machine
tools mainly utilising mitsubishi control systems, Siemens system
3, 810 and 8xx series controls. we currently have the siemens,
magnetek …
heidenhain monitor replacements LCD upgrade for them.

Specifications:
Type: AM Color TFT No.Colors: 262k Colors/ Green mono
Active Area: 211.2* 158.4mm
Brightness: 350cd/ m2
Backlight life: 50, 000hrs Typical
Max. Resolution: 800* 600 pixels
Contrast Ratio: 300: 1
Viewing Angles: 1400 H, 1100 V
Input Connector: 1* 15-pin HD Female/ 1* 15-pin LD cable
Sync.Type/ Level: Separate H& V ( + / - ve) TTL or Composite( -ve) TTL
Horizontal Scan: ( 15-40) kHz Vertical Scan: ( 55-75) Hz
AC Model: 110/ 230V 50/ 60Hz Power Consumption: 24W Typical
Response Time: 35ms Video Connection: Analog RGB 0.7-1.0 Vp-p
Operating Temp: -10 -65 Storage Temp: -30 -70
Support Input Source Singals: CGA, EGA, MDA, RGB, RGBHV, RGB Sync, S-video, Video, Green Sync, YPbPr .
Input Interface: 9pin, 3pin, 6pin, 14pin, 20pin, 25pin