Coolsat 5000 Platinum

Quantity Order:

Coolsat 5000 Platinum FTA receiver
The Coolsat 5000 Platinum has a new faster processor which will allow you to change channels quicker and enjoy one of the best on screen TV guides available. This new model also has component video output for those with new or (HDTV) High Definition TV's.
The Coolsat 5000 Platinum has a new faster processor which will allow you to change channels quicker and enjoy one of the best on screen TV guides available. This new model also has component video output for those with new or (HDTV) High Definition TV's.
Coolsat 5000 Platinum
Tuner and Channel
Input Connector F-type, IEC 169-24,Female
Loop Through Out F-type, IEC 169-24,Female
Component Y/Pb/Pr Output
Frequency Range 950MHz ~ 2150MHz
Input Impedance 75? unbalance
Signal Level -25 to -65dBm
LNB Power 13.5V/18V, max.400mA
22 KHZ Tone (22?2)KHz, (0.6?0.2)V
Diseqc Control V1.0/1.2/USALS Compatible
Demodulation QPSK
Input Symbol Rate 2 ~ 45 Ms/s
FEC Decoder 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K = 7
MPEG Transport Stream A/V Decoding
Transport Stream MPEG-II ISO/IEC
Profile Level MPEG-II MP@ML
Input Rate
Max. 15 MBit/s Video Formats 4:3 LetterBox, 4:3 PanScan Video Resolution 720 x 576, 720 x 480 Audio Decoding MPEG/MusiCam Layer 1 and 2 Audio Mode Stereo/Joint Sampling Rate 32 Khz, 44.1 Khz and 48 Khz
Main System
Main Processor STi5518
Memory
Flash-ROM: 2MB SDRAM: 8MB EEPROM: 32KB
A/V In/Out
Video RCA/Cinch, Video Output (CVBS) Audio L/R RCA/Cinch, Volume and Mute Control (16 bits DAC, Max. 2Vrms
Data Port
RS-232C Transfer rate 115 kbps, 9 pin D-sub type
RF Modulator
RF Connector F-type, IEC 169-24, Female Frequency CH 3: 61.25 MHz CH 4: 67.25 MHz Output Channel CH 3/CH 4 TV Standard NTSC-M Preset Channel CH3 (or TBD) Software changeable by Menu
Physical
Size (W x H x D) 260mm x 54mm x 232mm Net Weight 1.8 Kg Operating Temperature 0 ? C~ +45 ? C Storage Temperature -10 ? C~ +70 ? C
Front Console Physical User Interface
3-Keys Channel Up/Down, Standby 4-Digit 7-SEG Channel No. or Time Display 2-LED Standby, Remote
Power Supply
Input Voltage AC 90 ~ 250V Type SMPS (Switching Power) Power Consumption Max. 20W Standby Power Max. 8W Protection Separate Internal (Input contains surge protection

Recommend to your friends