Specification :
Plano-Concave Lens
Plano-concave lens is simple lens with negative focal lengths. They are often used to expand light or increase focal lengths in existing systems.
Specification:
Material: Crown glass, high index glass, or custom materials
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 40/20
Coating: Optional
Prism
Some typical components we offer:
Dove Prisms
Penta Prisms
Half Penta Prisms
Equilateral Prisms
Right-Angle Prisms
Roof Prisms
Wedge Prisms
Specification:
Material: BK7, UV Fused Silica
Dimension tolerance: +0.0/-0.1
Angle tolerance: +/-1'
Wavefront distortion: 1~5
Surface Quality: 40/20
Coating: Optional
ball lens
Numerical aperture of ball lenses is proportional to their refractive index. These lenses are used in visible and near infrared spectrum. The ball lenses could be equatorially ground relative to direction of optical axis to facilitate packaging and orient AR coating. The round cross-section of these lenses results in the large field of view and simple, cost-effective alignment where most of the positioning errors result in simple focusing errors. These lenses can be used as fiber-optics collimators. In order to accommodate different fiber-arrays pitch, the edge of the lens may be ground to a desired width.
Optical Windows
Optical windows are used for protecting fragile optical components inside an assembly. Substrate material is BK7, B270, Float Glass, Borosilicate, or UV Fused Silica.
Specification:
Material: BK7, UVFS, quartz, float glass
Diameter: +0.0/-0.2
Thickness: +/-0.1
Parallelism: 1'
Wavefront distortion: 1~5
Surface Quality: 40/20
Coating: Optional
Achromatic doublet lenses are designed to correct spherical aberration and chromatic aberration to get higher quality image. This performance can be achieved over a broadband of wavelength.
Specification:
Material: Cemented crown and flint glasses
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 60/40
Coating: Optional
Biconcave Lenses
Biconcave Lenses have negative focal lengths. They are often used to expand light or increase focal lengths in existing systems.
Specification:
Material: Crown glass, high index glass, or custom materials
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 40/20
Coating: Optional
Meniscus Lenses
Including Positive Meniscus Lens & Negative Meniscus Lens.
Specification:
Material: Crown glass, high index glass, or custom materials
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 40/20
Coating: Optional
Plano-Convex Lenses
Plano-convex lenses are the simplest lenses for focusing parallel rays of light to a point. Apply to laser systems, illumination systems and other specification.
Specification:
Material: Crown glass, high index glass, or custom materials
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 40/20
Coating: Optional
Biconvex Lenses
Biconvex lenses can get shorter focal length, use for focusing parallel rays of light to a point. Apply to laser systems, illumination systems and other specification.
Specification:
Material: Crown glass, high index glass, or custom materials
Focal length: +/-1%
Diameter: +0.0/-0.03
Center thickness: +/-0.05
Centering Accuracy: 1'
Figure (sphericity): 1~3
Surface Quality: 40/20
Coating: Optional