Specification :

polyaluminium chloride is a new high--efficiency unorganic polymer coagulating agent, It is produced by advancde production technology and the reaction and polymerization of highquality raw materials with such characteristics as little impurity and high formula weight and effective polymerization.

Product perfomance
1.Become flocculant in high speed, big block, high activity and rapid sedimentation analysis.
2.It doesn' t need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water.
3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water.

Purpose:
This product is suitable for ghe purification of tap water, life sewage and various industrial waste water.

Usage and cautions:
1.Solid producg should be added after it dissolve in water and the dilution ratio is generally: 2% --20% ( weight percent)
2.The added chemical reagent is generally: 1--15g/ ton solid product, subject to the differrnce of water quality and turbidness, specific added quantity should be decided by experimental result.
3.This product mustn' t be stored together with other chemical reagents.
4.Solid products should be stored in a ventiated and dry place with the storage period of two years, and the availability won' t be changed after the product is affected by damp.
Item National Standard Result Conclusion
Liquid Solid
Al2O3% 10.0 29.0 30.20 Conformed
Bas ic degree% 40.0 ~ 90.0 80.00 Conformed
Water Insoluble Material% 0.2 0.6 0.31 Conformed
PH Value 3.5 ~ 5.0 4.29 Conformed
Pb% 0.001 0.0012 Conformed
Hg% 0.00001 0.0000072 Conforme d
As% 0.0002 0.00018 Conformed
Cr% 0.0005 Undetected Conformed
Cd% 0.0002 Un detected Conformed