Products Catalog

Specification

Installation requires a water pipe pipe that has the strength and durability. HDPE or PE 100 answer to this. With high flexibility, strength withstand impact, low terperatur resistant, lightweight, easy fixing, no corrosion and abrasion, and aging resistance of up to 50 years, making HDPE become the primary choice for the installation of clean water.

Contact:
CV Keysha HDPE Indonesia
Cikas Park Block C No. 19. 7
Galaxy - Bekasi
Phone: 021-37146556
Fax: 021-82434969
Mobile: 081388006459
We Sell and Receive HDPE Pipe Installation Service

Characteristics of HDPE Pipe
1. Flexibility has a high ( tensile strength> 22 MPa and elastic> 700% )
2. Having a low temperature resistance even raw water temperature
3. Having the ability to withstand collisions ( impact strength)
4. Lightweight ( floating in water) with density = 0, 94 g / cm 3, so easy in the handling and transportation
5. The method is quick and easy connection
6. Resistant to corrosion and abrasion
7. Smooth surface, will minimize the loss of pressure
8. Period of 50 years usage

Hdpe pipe is the main option for the installation of clean water. Hdpe pipe pe 100 PN 16-12, 5-10-8-6, 3 are available from sizes 20mm up to 1200mm, hdpe pipe has an high level so that the flexible pipe hdpe can follow the structure of the soil. if the soil structure changes, the hdpe pipe will not break.

With yaqng special characteristics, allow HDPE pipe PE 100 can be used in varying conditions to drain the water.
UNDER WATER PIPE NETWORK
Underwater pipelines are made of HDPE pipe PE 100 has more advantages compared with pipes made of other materials. Kunggulan this on his base because of high bending power and perfect their compounds in the joints,
The use of HDPE pipe PE 100 on the installation of submarine pipeline will generate a strong pipeline system. Create flexible nature of PE 100 HDPE Pipe able to withstand the loads that arise during the long float, because the waves and water currents that exist at the time of installation. With the results of a fused connection, allowing Pipe HDPE PE 100 with easily and quickly spliced   in the field. These advantages are the main factors to be considered for installation of pipes in areas that are very difficult.
RELINING WITH PE 100 PIPE HDPE
For relining pipelines and water drainage, the use of HDPE pipe is recommended, because of flexibility and the ability to compound the extraordinary connections. Because of compounding, the installation of HDPE pipe PE 100 will have a connection strength equal to pipe kukuatan own.
HDPE pipe PE 100 can be easily curved to a radius of 25 times its outer diameter, it is because the high bending power.
Besides, because the weight is lighter, easier handling. Membutikan of experience that relining system is very effective in suppression efforts time and cost. This has always been in the account at any renovation plan to damage the pipe.
In urban areas traffic inhibiting factor on relining the pipe network can be minimized, in addition to low cost.
On the Installation of Pipelines through road tunnels where pip requirements, the ability of the range and flexibility are key requirements, HDPE pipe PE 100 always meet these demands.
FITTING IN DIFFICULT
Many requirements must be met for installation of pipes in flood areas, swamps, unstable regions and so on, because the load on the pipe will be very big.
For pipe installation in difficult areas, the emphasis is usually the emphasis is on flexibility of the pipe that will greatly affect the life time. Installation of pipelines in difficult terrain, resulting in difficulty in getting the pipe in accordance with the requirements needed.
Ditambahah again when the time is influenced by the length of a floating installation, here demanded a flexible pipe that has a high power, extra strong and large tensile strength at the joints.
HDPE pipe PE 100 is the right solution to overcome the problems and challenges, due to the difficult installation conditions require pipe systems that can be controlled.

Ready stock hdpe pipe 110 mm, 160 mm, 75 mm, 25 mm 250 mm
contact us as soon as it:
Contact:
CV Keysha HDPE Indonesia
Cikas Park Block C No. 19. 7
Galaxy - Bekasi
Phone: 021-37146556
Fax: 021-82434969
Mobile: 081388006459
Mobile : 0811 920 7117
Email: hdpe_indonesia@ ymail.com
www.pipa-hdpe.com
www.hdpeindonesia.co.id
Email: hdpe_indonesia@ ymail.com
www.pipa-hdpe.com
www.hdpeindonesia.co.id