Specification :

Description of machine
Mircodermabrasion is based on the principles of exfoliation and different from many other chemical exfoliations available, it is a dry exfoliation method that is safe to use on many parts of the body including the face area.
Mircodermabrasion is a new technology that basically removes the top layer of your skin, leaving the new skin beneath which is free of blemishes and discolorations.

The process occurs through the use of a small, hand held machine that contains a small blade implement. The implement scrapes away at the skin at very high speeds, removing the skin.

Now, it sounds painful but it' s actually quite painless. The machine is often called " lunchtime peel" since it can be performed in as little as 15 minutes. The results of the machine are often compared to that of a light chemical peel.

However, the machine has one major advantage: You can use it over and over as many times as you want. There are basically two types of machines you can choose from - one that uses crystal sand to scrap away the skin and another type that uses a diamond tip.

Functions as follows;
Exfoliating can also be understood as the removal of dead skin cells. By using the special we provide, it can help smoothing out wrinkles and fine lines. It is also very beneficial for scars left from wounds or chicken pox. It also helps to unclog pores, stimulate the circulation of the skin; Eliminate dead skin cells from the top layer of the skin and improves the skin' s ability to retain moisture. Giving the skin a more youthful and healthy appearance.

1. crystal flow and vacuum pressure are controlled seperately, make it simple and accurate to administer the peeling process and thus reduces any chance to cause discomfort,
2.this new system has been improved so no jam occurred in the crystal flow system and eradicated hence foot pedal is no longer required in this new model.
3.perfect design of the running-rod, with four holes, one releasing and the other recycling the crystal power, so as to avoid blocking the pipe and prevent to much powder remained on the surface.
4. A dehumidifier is attached to back of the equipment, it can avoid block caused by damp of powder.

Technical Specifications
MEAS. Of package: A: 89cm* 64cm* 39cm
B: 62cm* 43cm* 36.5cm
MEAS. Of instrument: 26cm* 50cm* 27.2cm
Operating voltage: 220V-10% , 50Hz/ 60Hz, AC
Power consumption: d150W
GW: 16KG