Specification :
ECU REPAIR TOOL ( FULL CABLES)
Model: AF-E9
ECU Laboratorial Equipment V2011-VIP
The ECU laboratorial Equipment is designed by our company alone, its design mainly aims at a large number of vehicle electricians who have ideals in diving into vehicle' s hi-tech.
This equipment can simulate the signal of AUTO, Such as the signal of crankshaft, camshaft, top dead center, CID sensor, air intake, IATS, CTS, O2S, switch of A/ C and etc.
Load the signals well, can disengage repairing ECU from AUTO.
It' s evidenced that it can examine and repair faults of EFI engine via simulating the engine of sensor, so that it greatly enhances repair speed and faults judgment abilities.
Main Features:
l According to engine control system, the user can set different types of crankshaft independent, Signal output ( for all models of the computer-driven)
l Automatic transmission input and output shaft signal simulation
l Commonly used computer automatic pin connector tips
l Set the waveform data written directly
l Crank signal waveform data is automatically set by your computer
l Time to test the independent six-channel injector
l Engine speed signal output
l Speed signal output ( Hall signal, magnetic signal)
l Three , four-channel ABS wheel speed signal output
l Diesel Electronic Control System Testing
l EGR solenoid valve driven
l Carbon cans clear the Solenoid valve driven
l Tachometer driven
l Blower Control Module Driven
l Idle valve driven
l 12V 24V stepper motor driven ( four, six-lane)
l 12V 24V servo motor driven
l Injector driven
l Oil pressure solenoid valve driven
l Ignition module driven
l Parking sensor ( ultrasonic) probe -driven
l Automatic transmission Shift valve driven
l Shift quality valve driven
l Oil pressure adjust valve-driven
l Water temperature, intake air temperature, outdoor temperature, evaporation temperature sensor signal simulation box
l Oxygen sensor signal simulation ( manual)
l Oxygen sensor signal simulation ( auto signal)
l Throttle signal simulation
l Carbon cans clear the Solenoid valve simulation
l EGR solenoid valve simulation
l Air flow meter, air pressure sensor ( analog, digital) signal simulation
l Point fire coil simulation
l Injector simulation
l Idle speed stepper motor simulation ( four, six-lane)
l A C relay simulation
l Oil pump relay simulation
l Radiator fan relay simulation
l Audio signal output, power amplifier driven
l Automatic transmission Shift valve, Shift quality valve, oil pressure adjust valve simulation
l Injector pulse wldth measurement
l Central locking server simulation
l Anti-theft resistance simulation
l All of the output signal overload protection
l High-Power 5V 12V 24V voltage output
l User extensions
Instrument specific reference data
l Output waveform can be set: five-channel arbitrary waveform output settings, which can output 1° crank angle signal, the signal sub-cylinder, 1 cylinder TDC signal, cam signal, the phase accuracy. Applicable to all models around the world crankshaft, camshaft signal simulation; also applies to all the world’ s automatic transmission input, output shaft signal simulation; ABS three, four-channel wheel speed signal simulation; computer settings waveform, the network lifetime free upgrades, at the same time the waveform data can be stored long-term within the memory cards.
l Output Signal: magnetic signals, the Hall signal, optical signal;
l Actuator driven: driven current 3A, 1% -99% duty cycle continous adjustment, continously adjustable frequency.
l Sensor Signal Simulation: resistance 100© -10000© ; voltage 0V~ 5V× 3 0V~ 1V
l Actuator Simulation driven: 54 channel simultaneous output
l Stepping Motor Driven: vurrent 1A, applicable to all vehicles with four-, six-lane 12V 24V , stepping motor driven.
l Output current: 5V-5A 12V-5A 24V-3A
l Instrument application Scop
l Dynamic diagnosis of automotive sensors, automotive engine, transmission, ABS, air conditioning, anti-theft and other computer repair, car model-driven teaching aids, research and development in automobile production;
l This instrument applies to Germany, the United States, Japan, Korea, China-made mini-cars and dozens of vehicle series, and thousands of Vehicle model;
Instrument Application:
1. Dynamic diagnosis of automative sensors, automotive engine, transmission, ABS, air conditioning, security and other computer repair, car models-driven teaching aids,
aomotive R& D.
2. This instrument applies to Germany, the United States, Japan, South Korea, dozens of domestic and other micro-Cars, thousands of cars.
Content:
Email Hide Email
Name
Relevant Products Rating 5 4 3 2 1
Relevant ProductsRelevant Products
Go to Member Menu