Specification :

PCIR101 - PCIR102
SIGNAL CONDITIONER WITH VOLTAGE (101), CURRENT
4...20mA (102) OUTPUT FOR DISPLACEMENT TRANSDUCERS

Main features
• Interface module integrated in the connector
• Standard output 0...10Vdc (PCIR 101)
• Standard output 4...20mA(PCIR 102)
• High linearity
• Adjustable Zero and Span
• Low zero and span thermal drift
• 4 pole female DIN43650 connector for LTM and PKM
potentiometer
• DIN 43650 4-pin female connector for direct connection
to LTM and PKM potentiometers (the DIN 43650 connector
in the PCM series is smaller and cannot be connected
directly)

The signal conditioner with 0...10Vdc (PCIR101) or 4...20mA
(PCIR102) output for displacement transducers are manufactured
with a single SMD circuit with high stability electronics
components that grant a very good linearity and thermal stability.
The circuit is integrated in a 4-pole connector, with the possibility
to adjust the trimmers of zero and span. It is possible to rotate the
internal part of the connector by 90° steps, allowing the
installation of the conditioner on the transducer in four different
directions.