Specification :

Dreambox series:
Dreambox DM500S, Dreambox DM500T, Dreambox DM500C, Dreambox DM100S, DreamBox DM600PVR, Dreambox DM600C, Dreambox DM600T, Dreambox DM7020Si, Dreambox DM7025, Dreambox DM800HD, Dreambox DM8000HD.

Dreambox series: SD DVB-S+ 2 Multi-CA+ CI+ USB( PVR) + 2 Tuner+ Enternet
Dreambox DM500S, Dreambox DM500T, Dreambox DM500C, Dreambox DM100S, DreamBox DM600PVR, Dreambox DM600C, Dreambox DM600T, Dreambox DM7020Si, Dreambox DM7025, Dreambox DM800HD, Dreambox DM8000HD.

� 300 MHz Processor
� Linux open source ( most parts under the terms of GPL)
� Supports Linux Standard API
� 1 x DVB Common-Interface Slot
� 2 x Smartcard-Reader
� Integrated Compact Flash Interface Slot
� MPEG2 Hardware decoding ( fully DVB compliant)
� TWIN Tuner, mixable, Plug& Play
� Tunervarianten DVB-S, DVB-C und DVB-T, pluggable
� 10/ 100 MBit compatible Ethernet Interface
� USB Port
� 12V switch cinch
� V.24/ RS232 Interface
� DM 7025: Big-size LC-Display
� DM7025+ : Big-size OLED-Display
� 32 MByte Flash
� 128 MByte DDR-RAM
� integrated IDE UDMA100 Interface
� Support for internal HDD in any capacity
� unlimited channel lists for TV/ Radio
� channel-change time 60 dB ( 1 kHz)
� Crosstalk < -65 dB
Output digital:
� Output Level 0, 5 Vss on 75 Ohm
� Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
� S/ PDIF-Output optical ( AC3)
Video parameter:
� Input Level FBAS 1 Vss + / - 0.3 dB on 75 Ohm
� Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
� Output: FBAS, RGB, S-Video over OSD selectable
VCR-Scart: FBAS
� Serielle Interface RS 232:
� Typ RS232 bidirectional
� Bitrate 115, 2 kBit/ s max.
� Plug Connector SUB-D-9
� Function: Update of Firmware
Ethernet:
� 10/ 100 MBit compatible interface
� Function: Update of Firmware
USB: USB 1.1 connector
Mini DIN:
� I2C for steering of external devices
� IR funktion
Pins:
1 5V
2 SDA ( I2C-Kanal 2)
3 SCL
4 3, 3V
7 GND
8 IR-Output
9 GND
UDMA100 IDE Interface:
� for internal HDD
� Compact Flash - Reader
LNB power and polarisation per tuner:
� LNB Current 500mA max.; short-circuit-protected
� LNB Voltage vertical 11, 5V at 400mA
� LNB Voltage horizontal 17, 3V at 400mA
Count of active satellite position:
� DiSEqC 1.0/ 1.2 SAT POSITION / SAT OPTION
� DiSEqC - Rotor Control
Power consumption:
� < 30W ( in operation, horizontal polarization / 400mA LNB current)
� < 25W ( in operation, no LNB)
� < 2W ( Deep-Standby-Mode)
Input voltage:
� 230V / 50 Hz alternating current + / - 15%
� 110V / 60 Hz alternating current + / - 15%
Physical specification:
� Ambient Temperature + 15° C...+ 35° C
� Humidity < 80%
� Size ( W x D x H) : 374 mm x 230 mm x 75 mm
� Weight: 1, 8 kg without HDD