Specification :

Desktop Charger

Parameter:
Input: AC 100V-240 V, 50/60 Hz
Output: DC 2.8~8.7 V, 150~250mA/h
Use Enviroment temperature:0-40 C
Suitable for battery of 200-3000 mAh;

Characteristic:
The charger adopt the advanced switching power supply which with high efficient, and adopt the advanced control chip circuit, can check the battery & stop charge automatic when finishing charge,can protect battery better.

Instruction:
1. Fix the battery:
First adjust the Charger hardware connector space according to the distance of battery positive pole plate and negative pole plate, make sure the battery and hardware connector in correct connection , if the CON is ON, it is OK ,Otherwise , Press the changed switch Button, then the CON is ON, it means connection is ok.

2.Charge confirmation:
After connected with the battery well, please put the charger to the 100-240 V AC power source, it indicating charge when the LED CH is flash.

Finish charge:
When the CH is OFF completely, the FULL become bright, it mean finished charge ,it can be take off for use.

Notice:
1.Indoor use only, please use the firm AC power source jack;
2.Avoid the high temperature, heat and direct sunshine when work;
3.Please cut off the AC power source when not use,
4.For the rechargeable battery use only, forbidden to use for UN-rechargeable battery .