fuel injector tester and cleaner ECM-V4

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Pack. & Delivery:

BOX

ECCOM Fuel Injector tester & Cleaner mainly apply to fuel injector testing, cleaning and quality analyze. The functions as following:
1
To test and analyze the injecting state.
2
To test the injector dribbling.
3
To test the injecting angle and atomizing.
4
To test the injecting volume.
5
To test the injector uniformity.
6
To test conduct the physical and chemical cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning and on-vehicle cleaning.
7
To test the open and close injecting pressure of the injector.
8
Can clean the engine without dismantling ( choose matched connector) .
9
Can operate the auto static test
dynamic test and selective test with the injecting dribbling
angles
atomization
uniformity of one or more( 1-4) injectors, can simulate any state of the vehicle to observe the complete process of injectors.
10
Can operate automatically
reversely
and ultrasonic cleaning with one or more injectors at different
state, such as high resistor
low resistor
electric voltage and electric current.

11
Can test by count mode and timing mode, also have backlight, can observe the injectors clearly.
12
If use new type injector, just need choose the matched connector and replace the O-ring.
13
It adopts to united design of microcomputer skill and intelligent engine, and suppose driving power and specified injecting protection system, ensure to operate the test and clean at any mode such as high resistor
low resistor
electric voltage and electric current.
14
Have powerful
safe and time ultrasonic cleaning system.
15
It uses environmental protective and safe test fluid and cleaning detergent, accords with Montreal Agreement, innocuous
with no peculiar smell
non-volatile and can be reclaimed repeatedly and effective, it’ s innocuous with the operators.

Recommend to your friends