Electromechanical Testing Machines are designed and manufactured according to
ASTM, ISO, DIN, GB etc standards. It is suitable for wide range of material for tension,
compression, bending, shearing and low cycle test. With special grips, it can also do torsion and Brinell hardness tester. It is for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.

Load meets or exceeds the following standards: ASTM E4, ISO75000-1, EN 10002-2,
BS1610, DIN 51221.
Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, EN 3846 and EN 1002-4.

Controller

There are three kinds of controllers to meet different applications:
z PCI card. It is full digital card built-in the computer.
z Full digital controller from TE. It can operate the machine by itself and also can be
controlled by Computer.
z EDC controller. Load cell self-indentify function.

Rubber/ elastomer:
Tensile: ISO37, ISO 527, ASTM D638 , ASTM D 412, ASTM D1414, DIN 53504;
Compression: ISO825, ISO844, ASTM D695, ASTM D1621;
Flexural test: ISO 178 , ASTM 790
Tear test: ASTM D624

Timber: BS-373 ASTM D-1037, D-143, D-879

Metal: Tensile test at room temperature DIN EN 10002-1, ISO 6892, APJ 5L, JIS Z
2241, BS 18, ASTM A370, ASTM E 8.
Tensile test at high temperature DIN EN 10002-5, ASTM E21.
Tensile test at low temperature ISO/ CD 384 E, ISO 15579, ASTM E345.
Tensile test on reinforced steel DIN 488, BS 4449, BS 4482, BS 4483, JIS 3112, ISO
10606, EN 10080
Testing of steel for reinforcing concrete SI 739, UNE 36065
Tensile test of steel braid & structural steel EN 10138, BS 5896, ASTM A416
Tensile test on metal foils ASTM E345, DIN 50154
Determination of hardening coefficient ( n-value) - ISO 10275
Determination of vertical anisotropy ( r-value) ISO 10113
Tensile test on welds DIN EN 895
Tensile test on chains DIN 22252
Tensile test on screws ISO 898
Shearing test DIN 50141, LN 65150
Testing of pipes EN 10232, EN 10237, ISO 8491
Compression test DIN 50106, ASTM E9
Compression test on hard metals DIN ISO 4506, EN 24506
Bending test ISO 7438, JIS Z 2248, JIS Z 2204
Sheet metal bending test, 0.05 to1 mm thick DIN 50151

• Electromechanical Universal Testing Machine
• Hydraulic Universal Testing Machine
• Hydraulic Compression Testing Machine
• Electromechanical Flexure Testing Machine
• Metal Impact Testing Machine
• Non-metal Impact Testing Machine
• Hardness Tester
• Friction & Wear Testing Machine
• Dynamic and Static Testing Machine
• Creep and Rupture Testing Machine
• Horizontal Testing Machine
• Torsion Testing Machine
• Fatigue Testing Machine
• Quick Forging Testing Machine
• Balancing Machine
• Sample Preparation Equipments
• Other lab Instruments