Specification :

BZC-600A truck mounted drilling rig
Main features
1. BZC-600A truck mounted drilling rig is designed by our engineers; it adopts truck mounted and is a rotary drilling rig.
2. The truck chassis adopts the special crane chassis of brand CHANATRUCK, the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump mast are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/ 4-80 mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
4. The power of drilling rig comes from the truck engine; the rig setups distribute implement and hydraulic system.
5. We can upset the spare electric engine and clutch implement according to client’ s requirement, so that the rig can work with diesel engine or electric engine.
6. We can set up a generator ( 15kw) , so that it is convenient to illuminate or work at night
7. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement..
8. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.
9. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.
Technical parameter
Drilling depth M 150 600
Drilling diameter mm 1500 500
Speed of turntable r/ min 21; 22; 37; 65; 99; 171; 20.2 reverse
Torque of turntable KN.m 5.6— 51.8
Single rope lifting capacity of main windlass KN 55

The capacity of main windlass( KN) 330
Singlerope lifting capacity of hydraulic windlass( KN) 60
The capacity of hydraulic windlass( KN) 240
The lifting capacity of main windlass hook KN 320
The rated load of hydraulic windlass hook KN 250
The height of mast ( mm) 12503
Pipe Kelly bar mm 108× 108× 7500
Assistant pipe ( mm) $ 89× 10× 6050

Hydraulic pump Model CB-HP80/ 40
Pump delivery ( ml/ r) 80
Rated speed ( r/ min) 2000
Rated pressure( MPa) 40

BW850/ 4-80
plunger pump
Diameter of cylinder ( mm) 106
Stroke of piston ( mm) 155
Theory of flow ( L / min) 500 600 700 850
Rated pressure ( Mpa) 7 6 5 4
Pounding times ( min-1) 136 160 187 219
Diameter of suction tube ( mm) 101.6
Diameter of drain pipe ( mm) 64
Input speed ( r / min) 1500
Input power ( kw) 80
Overall dimensions ( mm) 3350* 1900* 2000
Weight ( t) 2.6

Truck chassis Model CHANA
Drive form 8× 6

Engine Model TBD226B-6b ( Europe bemission standard)
Rated power KW 191Kw/ 2300RPM
acrotorque 1007N.m/ 2300RPM
Size  L* W* H ( mm) 11139× 2480× 2500
Electric generator Model MF
Rated power ( kw) 15
Rated voltage( v) 400
Rated current( A) 27
Speed ( r/ min) 1480
Frequency( Hz) 50
Protection level IP21
Insulation Class H
The highest speed Km/ h 75
Weight  kg 19340
Transport size L* W* H ( mm) 12543* 2480* 4012
Working size L* W* H ( mm) 11139* 2480* 13749
Selectable configuration:

Compressor
Brand Displacement Pressure Diesel engine Power
American Sullar1070XH 30.3 m3/ min 2.41Mpa Caterpillar 347Kw
Swedish Atlas XRVSI096 28.3 m3/ min 2.0Mpa Caterpillar 328Kw
Japan PDSJI00S 28.3 m3/ min 2.11Mpa Mitsubishi 327Kw
Kaishan LGCY26/ 20K 26 m3/ min 2.0Mpa Cummins 298Kw
Hongwuhuan HG900/ 20 25.5 m3/ min 2.0Mpa Cummins 239Kw

DTH Origin Model Diameter Length Weight
South Korea TD50 130-152mm 781mm 62Kg
TD80 194-254mm 1264mm 180Kg
TD100 251-305mm 1575mm 350Kg
TD112 320-381mm 1788mm 618Kg

Drill bit
DTH Diameter
TD50 146mm
TD80 216mm
219mm
250mm
Dust device