Specification :

South Nekon Machinery Co., ltd is one of the top machinery manufacturer in China, since the establishment, it has been committed to the development and application of technological innovations of ultrasonic machinery. Ultrasonic punching and cutting machine, also be called belt punching and cutting machine, ribbon punching machine, belt perforating machine, belt cutting machine, numerically controlled multi-angle cutting machine.

Working Principle of Ultrasonic Punching and Cutting Machine

This ultrasonic punching and cutting machine is using the heat energy which produced by the moment when ultrasonic vibrating, and the ultrasonic moulds or cutting moulds will touch the surface of the ultrasonic vibration with the power of the cylinder, then it can cut or weld or punch the material. In this processing, the cutting edge and the punching edge will be sealed automatically, without black or hard or loose trimming, feel smooth and perfect sealing effect.

Technical Data of Ultrasonic Punching and Cutting Machine

Model No. NK-CK2022
Voltage 220V
Air pressure 4-6kg/ cm2
Frequency 20KHZ
Power 2000W
Productivity 20-80 pcs/ min
Dimension 1300* 750* 1400mm
G.W. 125 KG

Features and Functions of ultrasonic punching and welding machine:

1.Use ultrasonic to finish the processing of punching and welding, the finished products will be very beautiful ( can do tangent cutting, crosswise cutting, trapezoidal cutting, in normal shape cutting, round holes punching, square shape punching, in-normal holes punching etc. ) ;
2.Multi-position working, can be used specially for the complicated punching and cutting processing;
3.Auto counting and total amount displaying, convenience and easy operation to make the operation more humanized.
4.PLC control, easy operation and easy to learn.
5.After putting the material the whole processing will be finished automatically, one worker can operate 2~ 3 machines which can save a lot of labour.

Scope of Application of Ultrasonic Punching and Cutting Machine:

This ultrasonic punching and cutting machine can be used to the following materials: mesh belt, ribbon, synthetic fiber fabrics, blended woven fabrics, Velcro ( magic sticker) which contains at least 30% chemical fiber and in rolls.

Easy operation guide of ultrasonic punching and cutting machine:

1.Putting the material in roll on the feeding frame of ultrasonic punching and cutting machine, adjust the screw which on the top of the cylinder according to the thickness of the material.
2.According to different requirements then set the parameters in the procedure, and check if the ultrasonic is ok before start the machine.
3.Start the machine by manual working status to check the effect of the punching or cutting, if not adjust related factors to the right and best status.