CNC milling machine

Price:

Negotiable

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

1

Pack. & Delivery:

wooden case

X axis travel/ mm: 500
Y axis travel/ mm: 300
Z axis travel/ mm: 360
Table size/ ( L* W) : 850* 320
Max load on the table/ kg: 150
Spindle speed/ rpm: 300~ 6000
Spindle motor/ kw: 3
Positioning accuracy/ mm: 0.01
Machine height/ mm: 2100
Space requirement( L* W) : 2000* 2000
Net machine weight/ kg: 2300
Control system: GSK980

1) This series machines have adopted machine bed used on machining center with wide guide rail and the guide rails have good wear-resistant capacity .main casting parts are made of resin sand that dealt with electric furnace smelting, which bestows the machine with a high rigidity. The adoption of ball screws with bearing at both ends has ensured the machine a stable accuracy.
2) With special design of modularization , the users can choose following functions based on the same machine base:
* manual tool change type/ pneumatic cylinder for tool unclamp
* servo motor/ stepping motor
* 3 axes linkage/ 4 axes linkage
* worktable shield guard/ full enclosed guard
* speed changed by gear/ speed changed by variable frequency
3.) The control setting can add extra electrical indexing head or NC indexing head, electric rotary table or NC rotary table and A.T.C system.
* optional full enclosure splash guard of machine not only makes the machine attractive but also prevents the coolant from leakage.
* automatic tool change is suitable for several continuous complicated processing on the base of one-time tool change
* the gearbox has adopted stepping belts to obtain a high speed and can applied to the processing of drilling , tapping , milling , boring , etc.
* after adding frequency changer and the adoption of gearbox with gear ratio 1: 4/ 1: 8, the machines have the function of stepless speed and automatic speed change to gain large torque with low speed, suitable for processing tapping screw thread and milling and cutting larger-diameter hole with low speed.
4.) The machines are suitable for drilling, hole-expansion, reaming, bevel edge, and tapping, for surface milling, step plane, slope, and milling groove, for cutting and milling curve, curve surface and cam, and for the management of several sets of machines
5.) Model TX32B : frequency-changing boring & milling machine , with the features of automatic speed change and max spindle speed( 3000rpm/ 6000rpm) , suitable for drilling , tapping , boring and milling with high speed.
Model TX32ZB: frequency-changing boring & milling machine with speed change by gearbox, which have the function of stepless speed and automatic speed change suitable for tapping and drilling with large torque.
Model TX32A: the worktable is extended. X axis travel is increased and the column is made higher, suitable for longer and higher work piece.

Recommend to your friends