Specification :

CB-HFT HALOGEN FREE HEAT
SHRINKABLE TUBING

CB-HFT is halogen-free, flexible, flame-retardant polyolefin heat-shrinkable tubing. This tubing is low smoke generating, abrasion resistant and in case of burning, produces no dioxin. CB-HFT tubing is widely used in enclosed areas where a flame-retardant, halogen-free environment is required. It is perfect for electrical and electronics applications and has uses in fields such as aerospace, automotive, construction, power delivery, and mass transit vehicles including buses, trains, airplanes, and marine vessels.
Certifications: UL, CUL, F-mark, Sony Green Partner
Specifications
Item
Specifications
Shrink Temperature (  ) 90
Operating Temperature Range (  ) 125
Radial Shrinking Ratio ( % ) e50
Longitudinal Change ( % ) d± 5
Tensile Strength ( Mpa) e10.4
Elongation at break ( % ) e200
Aging in Circulating-air Oven 158.0± 1.0 , 168hrs
After aging Tensile Strength ( Mpa) e7.3
Elongation at break ( % ) e100
Volume Resistance ( © .cm) e1014
Dielectric Strength at 1 min, AC2500V No breakdown
Heat shock No cracking
Flammability VW-1
Concentricity ( % ) e70
Size
Size As Supplied ( mm) After Recovery ( mm)
Inside Diameter Wall-thickness Inside Diameter Wall-thickness
Æ 1.0 1.5± 0.2 0.18± 0.08 d0.6 0.36± 0.06
Æ 1.5 2.0± 0.2 0 .20± 0.08 d0.8 0.4± 0.06
Æ 2.0 2.5± 0.2 0.20± 0.08 d1.00 0.42± 0.08
Æ 2.5 3.0± 0.2 0 .22± 0.08 d1.25 0.42± 0.08
Æ 3.0 3.5± 0.3 0.25± 0.1 d1.5 0.46± 0.08
Æ 3.5 4.0± 0.3 0 .25± 0.1 d1.75 0.46± 0.08
Æ 4.0 4.5± 0.3 0.25± 0.1 d2.0 0.48± 0.08
Æ 4.5 4.8± 0.3 0. 25± 0.1 d2.25 0.5± 0.1
Æ 5.0 5.5± 0.4 0.25± 0.1 d2.5 0.5± 0.1
Æ 6.0 6.5± 0.4 0.28± 0. 10 d3.0 0.56± 0.1
Æ 6.5 7.0± 0.4 0.28± 0.10 d3.25 0.56± 0.1
Æ 7.0 7.5± 0.4 0.30± 0.1 0 d3.5 0.58± 0.1
Æ 8.0 8.5± 0.5 0.30± 0.10 d4.0 0.6± 0.1
Æ 9.0 9.5± 0.5 0.30± 0.10 d 4.5 0.6± 0.1
Æ 10 10.5± 0.5 0.30± 0.10 d5.0 0.6± 0.1
Æ 11 11.5± 0.5 0.30± 0.10 d5.5 0.6± 0.1
Æ 12 12.5± 0.5 0.30± 0.10 d6.0 0.6± 0.1
Æ 13 13.5± 0.5 0.36± 0.12 d6.5 0.65 ± 0.12
Æ 14 14.5± 0.5 0.36± 0.12 d7.0 0.65± 0.12
Æ 15 15.5± 0.5 0.36± 0.12 d7.5 0.65 ± 0.12
Æ 16 16.5± 0.5 0.36± 0.12 d8.0 0.65± 0.12
Æ 17 17.5± 0.5 0.36± 0.12 d8.5 0.65 ± 0.12
Æ 18 18.7± 0.5 0.4± 0.15 d9.0 0.7± 0.12
Æ 20 20.7± 0.6 0.4± 0.15 d10.0 0.75± 0 .15
Æ 22 22.7± 0.6 0.4± 0.15 d11.0 0.8± 0.15
Æ 25 25.7± 0.7 0.40± 0.15 d12.5 0.90± 0 .15
Æ 28 29± 0.7 0.45± 0.15 d14.0 0.95± 0.15
Æ 30 31.0± 0.7 0.45± 0.15 d15.0 0.95± 0 .2
Æ 35 e35 0.50± 0.20 d17.5 1.0± 0.2
Æ 40 e40 0.55± 0.250 d20 1.1± 0.25
Æ 50 e50 0 .6± 0.250 d26 1.2± 0.25
Æ 55 e55 0.60± 0.250 d28 1.2± 0.25
Æ 60 e60 0.60± 0.250 d30 1.2± 0.25
Æ 70 e70 0.70± 0.30 d35.0 1.45± 0.25
Æ 80 e80 0.70± 0.30 d40.0 1.45± 0.25
Æ 90 e90 0.70± 0.30 d45.0 1.45± 0.25
Æ 100 e100 0.70± 0.30 d50.0 1.45± 0.25
Size in Inch
SIZE
( Inch) As supplied ( mm) After Recovery ( mm)
MIN ID WALL MAX ID WALL
3/ 64 1.2 0.18± 0.08 d0.6 0.36± 0.06
1/ 16 1.6 0.20± 0.08 d0.8 0.4± 0.06
3/ 3 2 2.4 0.20± 0.08 d1.00 0.42± 0.08
1/ 8 3.2 0.25± 0.1 d1.5 0.46± 0.08
3/ 16 4.8 0.2 5± 0.1 d2.25 0.5± 0.1
1/ 4 6.4 0.28± 0.10 d3.0 0.56± 0.1
3/ 8 9.5 0.30± 0.10 d4.5 0 .6± 0.1
1/ 2 12.7 0.36± 0.12 d6.5 0.65± 0.12
3/ 4 19.1 0.55± 0.250 d20 1.1± 0.25
1 25.4 0.40± 0.15 d12.5 0.90± 0.15
1– 1/ 4 31.8 0.45± 0.15 d15.0 0.95± 0.2
1– 1/ 2 38. 1 0.55± 0.250 d20 1.1± 0.25
2 50.8 0.6± 0.250 d26 1.2± 0.25
3 e80 0.70± 0.30 d40.0 1.45± 0.25
4 e100 0.70± 0.30 d50.0 1.45± 0.25
Other sizes are available upon special order.