Specification :

CHX Series Plastic Injection Machinery
Adopting five-pivot point double-elbow hydraulic machinery clamping devices, for energy saving.....
MODEL CHX-118T
Injection Unit Unit A B C
Screw Diameter mm 36 38 40
Screw L/ D Ratio L/ D 22.2 21.1 20
Shot size( Theoretical) cm3 181 201 224
Shot Weight( PS) g 154 171 190
Plasticizing Capacity( PS) g/ s 14 15.9 18
Injection Pressure Mpa 208 186 168
Screw Speed rpm 0-210
Clamping Unit Clamping Stroke KN 1180
Platen Stroke mm 340
Distance Between Tie-bars mm 370* 370
Max.Mould Thickness mm 380
Min.Mould Thickness mm 150
Ejector Stoke Distance mm 105
Ejector Tonnage KN 33
Ejector Number P 5
Others Max.Pump Pressure Mpa 16
Pump Motor Power KW 11
Heater Power KW 7.5
Machine Dimensions( L* W* H) m 4.5* 1.3* 1.9
Machine Weight( about) T 3.6

Remark:
* Theoretical injection volume= diameter of the injection moulding machine screw× injection stroke;
* Actual shot weight= theoretical injection volume× 0.9× 1.05 ( calculated with GPPS) ;
* Under normal condition, technical and parameters may be improved without notification.