ORV COMMANDER 4-IN-1

Price:

$900

Quantity Order:

Origin:

China

Quantity:

1

Tag key tool function

With this software you can program keys/ transponders for vehicles, bikes or trucks from different brands that using Megamos 13, Megamos 48 ( Megacrypt I) , Megamos 8E ( Megacrypt II) , Texas4C, Temic 11, Temic 12, T5, TK5555, Philips PIT - 7930/ 7931/ 7935 ( PIT) , Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961.

software is compatiable with AN020 and ZN001 transponder programmers. Just need dump from your immobilizer, put your NEW KEY ( or transponder) on the programmer and generate working key! You can also produce preprogrammed transponders for a different vehicles.

This programmer works with AVDI interface. It also is compatible with our software ABRITES Commander for VAG, BMW, Renault, Nissan, Mercedes, Fiat.

1) .Commander for OPEL/ VAUXHALL ver.3.5

Commander for OPEL/ VAUXHALL is professional software for diagnostic of Opel/ Vauxhall vehicles. It is capable to perform a diagnostic of any unit, which operates under one of the following protocols: Keyword 82, Keyword 2000 and GMLAN. It provides some unique functions, which are not supported by any other diagnostic tool.
Standard diagnostic functions:
For all electronic control units reading identification data
For all electronic control units read error ( DTCs)
For all electronic control units clear error ( DTCs)
Device scan
Data Display / Measured values
Security code programming
Vehicle identification programming
Injector programming - Diesel engines
Programming of the CAN configuration
Program immobilizer function
- Adaptation of Engine Control Module to immobilizer
- Adaptation of Immobilizer to the vehicle
Program immobilizer outputs
- Enable/ Disable Anti Theft Warning system
Special functions:
Read security code
- With a new special function ON005 you can read Security code from all Opel/ Vauxhall vehicles with CAN BUS by OBDII - Astra H, Corsa D, Vectra C, Zafira B, Agila B, Insignia
- Read security code PSG16 ( Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
Read/ Write EEPROM
- Magneti Marelli 1.3 16V CDTI ( Z13DT) - Agila, Corsa C, Tigra B
- SIMTEC71.1( Z18XE, Z18XEL) - Astra G, Corsa C, meriva, Tigra B, Vectra B, Zafira
- Read eeprom of the instrument Panel Cluster of Astra G, Corsa C, Meriva, Tigra B
Odometer correction
- Odometer correction - Movano B - Instrument Panel by OBDII
- Odometer correction in EDC16 - 1.7; 1.9 by OBDII
- Odometer correction in ECU - Bosch ME7.6.2, Delco MT35E
- Odometer correction PSG16 ( Y20DTH, Y22DTR) - Astra G, Zafira, Vectra C
- Instrument Panel Cluster - Astra G; Corsa-C; Meriva; Tigra-B; Vectra-B. NOT SUPPORT TRW IPC!
Engine Flasher
- Read/ Write flash memory from ECU - Simtec 70, Simtec 71, Delco HDRC, Marelli MJD 602, Motronic 7.6, Delco MT35E
Key Learning
- Read mechanical key number
Radio
- Read radio code by OBD from Delco CDR500
Airbag
- Erase crash data by OBD - Airbag SAB6 - Siemens with MCU Motorola HC11
Dump Tool
- Airbag TEMIC Astra G, Corsa C ( 68HC908AZ32) - clear crash data
- SIEMENS ( 68HC11E9) GM 24416701 DJ - clear crash data
- Read immobilizer II ( TMS) security code from dump
- Bosch EDC16 odometer correction
- Magnetic Marelli odometer correction
- Astra G, Astra H, Corsa D instrument panel odometer correction

Advanced functions:
Security access
Custom request - manually transmission of messages to a unit ( KWP82/ KWP2000/ CAN)
Custom query:
- Read memory by address - possibility to read/ program memory of electronic control units
- scanning of a unit memory space - automatically discover of all accessible memory

Supported vehicles:
Insignia - 2008+
Agila - 2000-2007 year
Astra F - 1992-2001 year
Astra G - 1998-2009 yer
Astra H - 2004+
Tigra - 1995-2000 year
Tigra B - 2004+
Vectra B - 1996-2001 year
Vectra C/ Signum - 2002+
Corsa B - 1993-2001 year
Corsa C - 2001-2008 year
Codsa D - 2007+
Meriva - 2003-2008 year
Zafira - 1999-2005 year
Zafira B - 2005+
Omega B - 1996-2003 year
Frontera - 1997-1998 year
Frontera B - 1999-2004 year
Calibra - 1990-1997 year
Vivaro - 2001+
Movano - 2004+

2) .Commander for Renault Ver.2.10

Commander for Renault is professional software mainly for programming the new key/ card of Renault vehicles.

NO NEED FROM A PIN CODE

Functions :

Connecting with all electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
For all electronic control units reading identification data
For all electronic control units read and clear error ( DTCs)
Airbag crash data clear Dacia Logan/ Duster by OBDII
Program ID in UCH module
Odometer correction for Renault Clio/ Kango/ Meganne with HC908 JAEGER
Key learning function - You can program key or card
Coverage K-line and CAN Bus vehicles
- Megane II X84 2003-2006
- Megane II Ph2 X84 2007+
- Scenic II X64 2003+
- Scenic II Ph2 X64 2007+
- Laguna II X56 2000-2005
- Laguna II Ph2 X74 2005-2007
- Valsatis X73 2002+
- Valsatis Ph2 X73 2006+
- Espace IV X81 2003-2006
- Espace IV Ph2 X81 2006+
- Master Ph2 X70 2002-2006
- Master Ph3 X70 2007+
- Traffic II X83 2002-2006
- Traffic II Ph2 X83 2007+
- Kango MUX Ph2 X76 2002-2007
- Kango X61 2008+
- Clio II Ph2/ 3 X65 2002-2006
- Clio Symbol
- Clio Thalia
- Clio Sedan
- Clio Classic
- Clio III 2005+ *
- Modus 2004+ *
- Master III *
- Dacia Duster *
- Logan X90 2004-2008
- Logan Ph2 X90 2008+
- Sandero B90 2008+
- Solenza 2003-2005
- Samsung SM3 2006+
- Fluence 2009+
- Twingo Ph2 X06 2002-2007
- Opel Vivaro 2002-2006
- Opel Vivaro Ph2 2007+
- Opel Movano Ph2 2002-2006
- Opel Movano Ph3 2007+
- Nissan Primestar Ph2 2002-2006
- Nissan Primestar Ph3 2007+

3) .Commander for Volvo 1.0
Correction mileage in the dashboard and in the CEM module by OBDII
Supported models:
Volvo XC60 2008+
Volvo XC80 2008+

Recommend to your friends