Specification :

Manufacturer Specifications:

Free Shipping through singpost airmail

Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/ AUDI/ SEAT/ SKODA vehicles, including KKL and CAN-BUS.

Functions

• Full support for control modules using the new " Service 22" identification methods.
• Support for control modules using the new UDS/ ODX/ ASAM protocol.
The following functions are supported:
Control Module ID ( including Advanced ID) , Coding, Security Access, and Fault Codes.
• New Session Log capabilities.
• Support for Generic OBD-II Mode 10.
• Support for vehicles with dual ECUs, or example the RS4 and W12 engines.
Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
• Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
• Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
• New internal Gateway Coding Assistant ( required for Audi B8 platform cars) .
• Much improved documentation ( Label Files) for many older cars
Module Version - identify the control module part number and coding version
DTC Memory - read and clear manufacturer diagnostic trouble codes
Actual Values - access live data
Activation - selected components can be activated
Code Module - code new control modules ( most models through 2002)
Adaptation - read/ reset Service Light parameters, view/ change block learn values
Basic Settings - view and change control module default settings ( Excluding 1.8T 01 and newer)
Individual Values - read individual measuring values
Readiness Code - Check status of applicable emissions related systems
Remote Control Programming - program Radio Frequency keys
Key Matching - match keys to Immobilizer control module ( 5 digit)

Workable Models
All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?

This interface ( adapter) is used as an interface and a USB cable to connect a VW/ AUDI vehicle to a PC with USB port for on-board diagnostics ( OBD) .

Specifications

OBDII Plug: J1962 16-Pin Male ( to Car)
Connection Port: USB port
Length: 1.8 meters
Powered from car battery over OBD2 connector

Package Including:

1pc x VAG COM 805.1 Cable
1pc x CD Drive

sales02( at) cardiag co uk