Specification :

JCY

-003/ 006 is one more function LED Lighting telecontrol system with the color& light adjusting.JCY-003 is the wireless telecontroller, JCY-006 is the receiving controller, both of them work in using to achieve the brightness and color temperature adjusting function of LED Strip.

JCY-003 Exterior Size

114mm× 56mm× 22mm

JCY-003 Function Describe

There are 11 press-keys for the telecontroller.

11 press-keys as follow:

1 Key-press of the switch: red key, switch on or switch off the lamp.

2 Change warm key: control the color temperature and change into warm, it will increase one grade after pressing one time, the total is 7 grades.

3 Change cool key: control the color temperature and change into cool, it will increase one grade after pressing one time, the total is 7 grades.

4Turn up the brightness: control the brightness of the lamp increase, it will increase one grade after pressing one time, the total is 7 grades.

5 Turn down the brightness: control the brightness of the lamp reduction, it will reduce one grade after pressing one time, the total is 7 grades.

6 H : The highest brightness, it can achieve the maximum brightness.

7 M : The neutral brightness, it can achieve the middle brightness.

8 L : The lowest brightness, it can achieve the minimum brightness.

9 Cool: Cool color temperature, it can achieve the cool color temperature.

10Neutral: Neutral color temperature, it can achieve the neutral color temperature of the cool and warm.

11Warm: Warm color temperature, it can achieve the warm color temperature.

Product Parameter

1Case material: ABS+ PC

2Input Voltage1.5V* 3 AAA battery

3Power consumption of the standby: max 5uA, normally, a set of new batteries can be used 24 months

4Wireless frequency433.92MHz, all integration chips design, can pass the FCC certification

5Emission powerless than 10mW

6Mating telecontrol distanceopen area 20-30M.