Specification :

GM Tech-2 PRO Kit ( CANdi & TIS)
web: www.bcobdtek.com
email: sales@ bcobdtek.com

Description:

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008

Features:

Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech-2 Specifications

Dimensions 12× 6× 2

Microprocessor 32 bit, 16 MHz

Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.

Communications Integral RS232 communication port.

Screen 3.8× 2.8 backlit monochrome with full graphics
capability: 320× 240 pixels. Displays up to 9 vehicle
parameters at once

Download Tech-2 Brochure ( 5.2 Mb )

Download Tech-2 Users Guide ( 6.8 Mb )

GM Tech-2 Starter Kit with Candi Module & TIS Kit includes ( All ORIGINAL and NEW! ) :

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module( CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
Tech-2 Users Manual download ( 3.9 Mb )
An industry change in protocol from OBD II to Controller Area Network ( CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’ s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

Product Name : GM Tech-2 PRO Kit ( CANdi & TIS)
Relation Link : http: / / www.cnreliable.com/ original-diagnostic-equipment/ original-diagnostic- equipment-00429A.html

contact details:
email: sandyvictor2008@ gmail.com
MSN: sandyvictor.cnreliable@ hotmail.com
skype: www.bcobdtek.com
contact person: sandy
mobile: 86-15986796708

welcome to contact me

tks