Specification :
Fiber to ethernet converter fiber media converter(veecom)
joe[at]veecom.com.cn
10/100Mbps Managed Media Converter
Overview
Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.
Hardware Function
Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.
Software Function
Support local and remote management
Support Console, WEB and SNMP management
Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version
View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
Support remote loop back function, three loop back position selectable. Help to find out the line fault conveniently
Summarize the data flow information and show the communication state of each port
Support SNMP management. Set Trap Destination and Community Name, including the authority
Reset the system or a single module or the remote end device via management software
Reset chassis to factory default
Support online firmware upgraded
Show the detailed information of power supply, including AC/DC type and running status
Provide MIB file, make it easy to be integrated into the third party SNMP management software
Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it's very easy and clear to manage all devices even if many chassis in one window.
Technical Specification
Device Size
Standalone: 132mm (width)*36mm (depth)*122mm (height)
19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
Power
AC: 220VAC+-20%, 50/60Hz
DC: -40~-57 VDC
Power consumption: Standalone < 3W, Chassis full of modules < 50W
Typical Order Information
V2-M32CA Multimode 1310nm, SC/PC, Standalone, 220VAC power supply
V2-M31CD Multimode 850nm, SC/PC, Standalone, -48VDC power supply
V2-S3042CA Singlemode 1310nm, 40Km, SC/PC, Standalone, -48VDC power supply
V2-S3082CA Singlemode 1310nm, 80Km, SC/PC, Standalone, 220VAC power supply
V2-S3042TM Singlemode 1310nm, 40Km, ST/PC, Module
V2-W3042CA Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Standalone, 220VAC
V2-W3043CA Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Standalone, 220VAC
V2-W3042CM Singlemode & singlestrand, TX-1310nm, 40Km, SC/PC, Module
V2-W3043CM Singlemode & singlestrand, TX-1550nm, 40Km, SC/PC, Module
For more order models, please contact us.
I'm Joe Cheng, a sales director of Bell Data Communication Equipments Co., Ltd , a China local manufacturer . Our products brand is VeeCOM(LANBEL) .
Our major products series are:G.703/E1 to V.35 and ethernet Converters/DSL CPE/ADSL SYSTEM/Multiplexers/Bridges/Modems/Switch/E1&T1 equipment/Fiber Equipment/wireless modem/ADSL modem(The particular products are shown on our website: http://www.veecom.com.cn
or the website in alibaba: http://lanbell.en.alibaba.com/ ).
contact:Joe Cheng
E-mail:joe[at]veecom.com.cn
MSN:chengling611[at]hotmail.com
Company : Changzhou Bell Data Communication Equipments Co., Ltd
Website:www.veecom.com.cn
Add: 15A Zhongnan Building, NO.33 Guanhe west road, Changzhou, Jiangsu, China
Tel: +86-519-86809961 86809962 86809963 86809965
Fax: +86-519-86809967
Postalcode: 213003